Muc-Off

The Muc-Off Bicycle Chain Brush is an essential tool for keeping your bikes' chain and whole drivetrain spotlessly clean and running smooth. The multi-faceted, ergonomically shaped brush is designed to clean 3 sides of the chain at any one time, its bristles penetrate deep between links and rollers for a deeper clean, which all help to keep your chain in optimum condition for longer.

The Muc-Off Saddle Pack is your ultimate riding companion, for the trail or the road.

Crafted from high-quality, weather-resistant materials, the pack is built to endure the most demanding conditions, keeping your essentials safe whatever the ride throws at you.

The hook and loop straps make it super easy to secure it to your saddle rails, and there’s more than enough room inside to stash all those riding essentials: An inner tube, Muc-Off repair kit, multi-tool, Rim Stix and more. We’ve even built in a handy slot to stow your cash and cards, so you can explore with the peace of mind, that you’re covered in any situation.

FEATURES

• Premium grade water repellent 600D TPU
• Durable, moulded and heat-sealed construction
• Water resistant zip
• Hypalon Hook and Loop adjustable strap
• Designed to fit inner tube, Muc-Off mini pump or CO2 inflator, Rim Stix, multi-tool, Repair Kit, and other accessories
• Easy to fit and remove, no tools required
• Inner mesh net and elasticated straps
• Reflective printed graphics
• Lightweight

PRODUCT SPECIFICATIONS

• Capacity – 0.7L
• Weight: 95g
• Dimensions: 160 x 110 x 70mm
• Colour: Black
• Materials: 50% POLYURETHANE (TPU), 50% POLYETHYLENE (CPSE)

WHAT'S INCLUDED

• Big Bore Valve: Available in 6 colours and 4 different sizes (60mm available in Black only).

• Hex Slot Key: 4mm machined hex key slot for easy installation/removal

• Rubber Bases & O-Rings: Supplied with various rubber bases and O-Rings to optimise fit and seal with multiple rim type

• Bespoke Spanner: Specifically designed to tighten the big bore body during installation and removal

• Sold Separately: Sealant dipstick also available separately

HOW TO

1. Remove Ball Valve: First, remove the ball valve body, cap, locking ring & O-ring from the valve stem.
2. Choose Base: Choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Slide this down to the bottom of the valve stem. (If your rim has a larger valve hole and the smaller circular fitment is too loose, use the larger circular fitment to plug the hole).
3. Push Valve Stem Into Hole: Now push the valve stem into the hole in the rim and push it right the way through. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.

DESCRIPTION

The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 50m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

Looking for an all-weather Essentials Case that's got your back no matter the conditions? One that can stash your phone, essential tools, and puncture repair kits but also fits snugly in your back or side pocket? 

Introducing our Waterproof Essentials Case, the ultimate storage solution for cyclists of all terrains, from rugged trails to road. Crafted from durable, waterproof TPU fabric, this case provides the necessary protection for your ride essentials. Its robust rubber-encased rope zip pull ensures quick and hassle-free access while on the move.

Equipped with Molle straps on the back, this case easily attaches to Molle accessories or bags for added convenience. Inside, a ripstop divider keeps your cards separate from your smartphone, or your inner tube neatly apart from multi-tools, CO2 cylinders, and tyre levers. Additionally, there's an internal zipped pocket for smaller valuables like keys and coins, ensuring everything stays secure and organized. 

• Weight: 61g 
• Dimensions: 175 x 90 x 20 mm 
• Material composition: 55% TPU, 45% POLYESTER

FEATURES

• Premium grade waterproof 600D TPU
• Durable, moulded and heat-sealed construction keeps water out
• Waterproof zip with puller*
• Inner ripstop divider
• Zipped internal pocket
• Reflective printed graphics
• Lightweight

** Ensure the zipper puller is securely closed into the zip stop to maintain waterproofing

The Muc-Off Crank Preload Ring is a super durable, precision CNC machined 7075 piece of hardware.

It allows you to precisely adjust the ‘preload’ tension on the bottom bracket bearings. What does this do? It helps to remove the side-to-side play and slack in thru-spindle bottom brackets, to help maximise the life of your bottom bracket bearing, as well as giving you a creak-free ride. It also comes in our classic anodised colours for added bling!

It fits onto the left crank arm of any mountain, gravel or road bikes that have SRAM, RaceFace or Easton 30mm spindle cranks, or SRAM DUB 28.99mm spindles installed.

Our precision crank pre-load ring fits onto the left crank arm of:

• Mountain bikes
• Gravel bikes
• Road bikes

that have:

• SRAM 30mm spindle cranks
• Race Face 30mm spindle crank
• Easton 30mm spindle cranks
• SRAM DUB 28.99mm Spindles installed
• UNITE 30mm spindle cranks

FEATURES

• Precision CNC machined, 7075 aluminium body and threaded adapter ring for a perfect fit
• Stainless steel hardware
• Allows you to precisely adjust the preload tension on the bottom bracket to help extend the life of your bb bearing!
  

HOW TO

SRAM 30MM SPINDLES

Tools required: Alongside your usual bike tools required to remove your cranks, you’ll also need a bottle of thread lock (Loctite 638 or similar).

1. Place the bike in a bike stand.
2. Either remove the chain completely or remove it from the front chainring.
3. Remove the entire crankset according to manufactures instructions.Loosen the bolt on the OEM crank ring with an appropriately sizedtool.
4. Turn the ring clockwise one full turn.
5. Tighten the bolt.
6. Pull on the crank ring to remove the entire assembly, including thespacer ring.
7. Place the OEM crank ring to one side, this will not be reused.
8. Clean the crank spindle thoroughly using Muc-Off Bio Degreaser.
9. Unbox the ‘Muc-Off Crank Pre-Load Ring’.
10. Slide the appropriate Muc-Off spacer ring onto the crank spindle.
11. Check you have the correct size installed, it should be a tight fit, the spacer ring should not wobble.
12. Remove the spacer ring and apply a small amount of thread lock to the area of the spindle where the spacer ring will be located.
13. Slide the spacer ring back onto the spindle.
14. Wipe away any excess thread lock - Avoid getting any onto thethreads.
15. Rotate the spacer half a turn to ensure good thread lock coverage
16. Leave the thread lock to set for 24 hours.
17. Screw the Pre-Load Ring onto the spacer until it’s finger tight.
18. Reinstall the crankset onto the bike.
19. Unscrew the Preload Ring following the directional arrows, until ittouches the bottom bracket bearing.This does not need to be tight,just enough to stop the crankset frommoving.
20. Tighten the stainless bolt to 1Nm torque with a 2mm Hex Key.
21. Give the cranks a spin to ensure everything is moving smoothly. Ifthere is too much resistance, loosen the bolt and back off the Preload Ring slightly.

Periodically spray a protectant such as HCB-1, MO-94 or Bike Spray onto body to ensure there is zero corrosion.

RACEFACE®

Tools required: Alongside your bike tools to remove your cranks you will also require a bottle of thread lock (Loctite 638 or similar) 

1. Place the bike in a bike stand
2. Either remove the chain completely or remove it from the front chainring.
3. Remove the entire crankset according to manufacture instructions. Loosen the bolt on the Raceface crank ring with an appropriately sized tool.
4. Unscrew the existing Raceface preload ring and remove it from the spindle.
5. Place the OEM crank ring to one side, this will not be reused.
6. Clean the crank spindle thoroughly using Muc-Off Bio Degreaser.
7. Unbox the Muc-Off Crank Preload Ring.
8. Screw the Preload ring onto the spacer until it is finger tight. (You will not need a spacer ring.)
9. Reinstall the crankset to the bike.
10. Unscrew the Preload Ring in the direction the arrows shows until it touches the bottom bracket bearing. This does not need to be tight, just enough to stop the crankset from moving.
11. Tighten the stainless bolt to 1Nm torque with a 2mm Hex Key
12. Give the cranks a spin to ensure everything is moving smoothly. If there is too much resistance, loosen the bolt and back off the Preload Ring slightly. RACE FACE® is a registered trademark. SRAM™ is a registered trademark.

Periodically spray a protectant such as HCB-1, MO-94 or Bike Spray onto body to ensure there is zero corrosion.

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

DESCRIPTION

Finally, the solution to protecting your disc brakes during maintenance or transit is here! Our Patented design makes life easy, they are fast and easy to use and help to ensure you won’t have protectant or lube overspray on your discs. The end is nigh for loss of braking power from protectant overspray! Finally!

FEATURES

• Protects disc brake rotors and pads from protectant and lube overspray
• Protects discs during transit
• Quick and easy to use
• Fits all road/mtb rotors
• Simply rinse and use again
• Breathable neoprene
• Protects against corrosion
• Supplied as a pair

Take your bike cleaning regime to the next level with our versatile, quality and great value 5 Premium Brush Kit. Ideal for agitating dirt while caring for your bike's delicate finish.

HIGHLIGHTS

• Premium brushes with ergonomic design 
• 5 brushes specifically designed for bikes
• Ideal for giving your bike an all-over clean

WHAT'S INCLUDED

• Soft Washing Brush
• Detailing Brush
• Claw Brush
• Wheel & Component Brush
• Two Prong Brush

Our Luxury Microfibre cloths aren’t just cloths – they're a gateway to effortless cleaning, drying and polishing power at your fingertips! Muc-Off Microfibre cloths contain an amazing ‘split-fibre’ technology, that vastly increases surface area absorbency to easily eliminate smears and blemishes. As well as this, our microfibre’s trap dirt deep in the pile of the cloth – which helps to avoid the chance of swirling, which could ultimately lead to damaged paintwork. Because our cloths are made up of very small fibres, you’ll be cleaning at a much deeper level, meaning that whether it’s interiors or exteriors, bikes or cars, you can be sure you are removing the dirt and grime!

The Muc-Off R&D team thought of everything and made sure that these handy cleaning cloths are machine washable, meaning they can be used time and time again!

HIGHLIGHTS

• Super-soft, high quality cloth
• Safe to use on all surfaces
• Deep-pile material traps dirt deep in the pile of the cloth preventing scratches or swirling
• Split-fibre technology for increased absorbancy
• Machine washable

DESCRIPTION

Don’t let punctures get in the way of a good time! These 16g CO2 Cartridges are perfect for taking on a long road or gravel ride or for keeping in your bag when you’re commuting. They work with our CO2 Inflator Kit to quickly inflate your inner tube to get you back riding in a flash.

FEATURES

• Can inflate tyre up to 100psi from flat
• Each cartridge contains 16 grams Carbon Dioxide
• Perfect for taking on a long road or ride or for keeping in your bag when you’re commuting.

DESCRIPTION

Designed specifically for use on bikes, Muc-Off Bio Grease possesses a unique formula that prevents corrosion and water ingress so your bike’s components will last long into the future! Use Muc-Off Bio Grease to increase your performance, and ensure every ride will be smoother than your last.

Muc-Off Biodegradable Bicycle Grease is specifically blended for the unique ‘low speed’ applications found on bicycle parts where reducing friction is paramount.

This premium formulation is based on renewable resources, and has a combination of extreme pressure lubricity additives and natural ‘slip’ giving it unrivalled performance in its class!

Bio Grease also has the added benefit of being readily biodegradable* and extremely resistant to water wash off, which helps prevent corrosion, reduce friction and improve the performance of moving parts.

At Muc-Off we are dedicated to making eco friendly products that won’t harm you, your bike or the planet, and Bio Grease is no exception. This grease is fully biodegradable and free from any nasty petroleum based oils!

NOT for use on bicycle chains.

*Only contents are biodegradable.

FEATURES

• Biodegradable ultra slippery formula
• Suitable for use on titanium parts
• Resistant to water "wash off"
• Reduce friction and improve performance of moving parts 
• Operating Temperature Range: -20 °C to +120°C

DESCRIPTION

The guys here at Muc-Off HQ have been racking their brains to come up with a solution for carbon fibre bike parts slipping. Whether it's your Carbon seatpost having a mind of its own or your Carbon stem is struggling to grip your handle bars, our mad scientists have come up with the answer. May we introduce the all-new, highly advanced Carbon Gripper!

Put simply, the Muc-Off team have created a highly efficient carbon fibre assembly compound that is essential for preventing over-tightening and creating a secure ‘mating friction’ between carbon surfaces or indeed carbon to metal parts.

Designed for mechanics and riders building their own bike, the Muc-Off Carbon Gripper creates friction between carbon fibre clamping areas and lowers clamping torque thus decreasing the chance of fatigue, internal fractures or shortening component life.

So get your money’s worth out of your carbon fibre parts. Use Muc-Off Carbon Gripper!

FEATURES

• Keeps Carbon parts gripped
• 'Non slip' surface to surface formula
• Specifically designed for Carbon Fibre parts

HOW TO

1. Apply a thin layer of Carbon Gripper to fibre clamping areas
2. Spread the Carbon Gripper evenly
3. Wipe away any excess

DESCRIPTION

Copper Compound paste make stuck threaded screw connections and tight metal joints are a thing of the past. Simply apply it to threaded, plug and screw connections that are especially exposed to corrosion. The copper-based assembly paste reliably prevents contact corrosion and resulting damages on threaded connections and metal parts.
Apart from protecting bottom bracket, headset and thru axle threads, the assembly paste also keeps sensitive components running smoothly. It helps reduce friction and thus prevents creaking and cracking noises on seatpost and cranks.

FEATURES

• Copper-based assembly paste.
• For metal connections of steel, titanium, aluminium.
• Protects from corrosion, reduces friction.
• Saltwater resistant.
• Does not attack metal, carbon, plastic and rubber.
• WARNING: Causes serious eye irritation.
• Keep out of reach of children.
• Store in a cool well ventilated area.
• We recommend wearing gloves, wash immediately with plenty of soap and water if contact is made with skin.