Sort by:
Ride uninterrupted with our Precision Tubeless Repair Capsule. It’s lightweight, easy-to-use, and the ultimate backup for those gnarly punctures that just won’t seal.
The tough and durable CNC machined 6061 aluminium body doubles as a stash for your worms and the tool’s handle is silicone wrapped for an easy grip in all conditions.
It’s both a puncture plug and a reamer tool thanks to the hardcore 304 Stainless steel 2 in 1 integral tool, and comes supplied with 5x thin, 5x medium, and 5x thick worms. It’s compatible with all tubeless road, gravel, and MTB tyres.
FEATURES
- Durable CNC Machined 6061 Aluminium construction
- Premium anodised finish
- Stainless Steel 2-in-1 puncture plug/reamer tool
- Integrated Presta valve core remover slot
- Compact capsule body stashes tyre worms
- Silicone wrap for grip
- Knurled screw in design with weatherproof O-ring
- Compatible with Road, Gravel, and MTBs with tubeless tyre setups
WHAT'S INCLUDED
- Puncture Plug 2in1 tool and capsule
- Supplied with 15 plugs:5 thin, 5 medium, 5 thick (Refill packs available separately).
- Cordura® stash pouch
HOW TO
- Identify the source of the puncture and remove the debris or puncture source.
- If the puncture requires the medium or larger worms then ream the hole several times with the knurled area of the tool, make sure you use a 45-degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!
- Now Grab a tyre worm (you may need to use the tool to help slide out the worms). The largest size is for MTB tyres the medium for gravel tyres and the small for road tyres, but you can select the best one for your sized hole. Now pinch one end of the worm hard between your fingers to flatten it out. (If using the thin worm thread through the tip at the end of the tool, not the main larger slot)
- Thread through gap at the end of the tool so the worm is now sitting centrally on the tool.
- Locate the puncture hole then insert the tool through the hole (at a 45 degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!) until the worm is around halfway through the tyre. Ensure the ends of the worm remain on the outside of the tire.
- Turning the tool slowly clockwise a few revolutions to twist the worm inside the tire and slowly pull up to remove – leaving the worm in your tyre and the hole plugged.
- Re-inflate tyre to your desired pressure and you’re ready to roll!(We recommend a max of 80 PSI on a road bike!)
- Once you are home we’d recommend trimming the worm ends down with a knife so there is a minimum of 3-5mm still sticking out the tyre. (Be careful when trimming).
TOP TIP! Simply trim down your different sized worms into singles or doubles and place them inside the capsule so you have multiple options for different sized punctures!
WARNING: Keep out of reach of children. The tool has SHARP EDGES so use with caution. For Road tyres we strongly recommend replacing your plugged tyre once it’s safe to do so, particularly if you want to use with high psi!
(We recommend a max of 80 PSI on a road bike!)
DESCRIPTION
B.A.M! quickly inflates and repairs punctures at the same time by injecting latex foam and air into a tyre or tube.
Now featuring a flexible hose for Presta and Schrader compatibility, B.A.M! is the perfect emergency backup that can be strapped to a bike frame using the B.A.M! Utility Belt (sold separately) or carried in a Ride Pack or Saddle Pack.
Compatible with Road, CX/Gravel and MTB wheels, as well as most tubeless sealants, B.A.M! Will inflate a 29” MTB tyre in under a minute, sealing 3-4mm holes with ease.
F**K Punctures - Ride uninterrupted with B.A.M!
FEATURES
- Pink Synthetic Latex foam sealant and inflation
- Flexible Hose fits Presta and Schrader valves
- Compatible with Road, CX/Gravel and MTB wheels
- Inflates a 29" MTB tyre & 700c Road tyre in under a minute
- Seals holes up to 3-4mm
- Does not contain ammonia
- Compatible with most tubeless sealants
HOW TO
- Find the cause of the flat tyre and remove any debris.
- Move the valve to the 12 o'clock position on the wheel and open the valve core (if you have one) and check that the valve is clear.
- Shake the can.
- Screw the hose on to the valve stem.
- Hold down the button until the tyre is sufficiently inflated.
- Remove the hose from the valve and tighten the valve core.
- Give the wheel a quick spin to distribute the latex round the tyre.
- Get back to the action!
Introducing the ultimate Valve Core Remover Tool: Precision crafted for effortless core removal.
Struggling with stubborn valve cores not your jam? Maintaining your tyres, tubes, or tubeless setup should be hassle-free, so we created the Valve Core Remover Tool. Crafted with precision from CNC machined 6061 aluminium, this tool is designed to make removing your valve cores quick and easy. Engineered to tackle both Presta and Schrader valves, say hello to your toolkit'slatest addition.
FEATURES
- Compatible with both Presta and Schrader valves
- Durable CNC construction
- Aircraft grade 6061 aluminium
- Workshop or keyring slot
- Compact design
- Knurled grip
WHAT'S INCLUDED
- Weight: 13g
- Dimensions: 63mm x 12mm
Introducing the It Blows! Precision Air Blaster – the compact, rechargeable air blaster that’s here to make drying your bike a breeze.
This tornado in your hand cranks out a precision flow of high-powered air to blast water out of every nook and cranny of your ride after a clean, firing air into all those pesky, hard-to-reach water-pooling spots helping to prevent rust and corrosion.
Built from hardcore aircraft-grade aluminium, this pocket rocket is CNC machined so it is tough as nails and ready to rock wherever you take it.
Unleash the power of touchless, hardcore drying!
Tip! Use alongside our ceramic coating for insane water beading and post-clean drying!
FEATURES
- 4 Speed/power settings for optional airflow.
- High speed 80W motor delivers touchless drying, reducing the risk of micro-scratching paintwork and corrosion.
- Durable CNC Machined Aluminium construction with anodised finish
- Supplied with additional silicone nose piece for targeted airflow.
- Compact, handheld design with a soft touch on/off button
- USB-C rechargeable battery
- Battery indicator light
- Can be used on bikes, motorcycles, cars and other powersports toys.
WHAT'S INCLUDED
- It Blows! Precision Air Blaster
- Silicone Nozzle
- USB-C Charging cable
- Manual
SPECIFICATIONS
- Dimensions: 68 x 36 x 124mm
- Weight: 295g ± 5g
- Motor: 80w
- Fan speed (RPM): Turbo: 100,000, High: 80,000, Mid: 60,000, Low: 40,000
- Battery Capacity: 1100MAH
- Rated Voltage: 12V
- Charging Voltage: 5V/2A
- Charging Port: USB-C
- Charging Time: 3 hours
- Run Time: Turbo: 10 mins, High: 15 mins, Mid: 45 mins, Low: 1.5h
- Noise level: 56 – 81 dB
- Operating temperature range: 0°C~+40°C
Level up with the next gen of electric inflation tech. Gear up, charge up and inflate fast with this pocket-sized game-changer.
Featuring an LED display which shows real-time air pressure and battery level and inflates rapidly up to 120psi!
Small in size, big on innovation, this mini inflator is designed for riders who prefer riding to pumping. With its sleek full aluminium body and innovative inflator head, this tiny titan packs a punch, delivering up to 120psi of lightning-fast inflation with electric effortlessness.
Don't let its size fool you – powered by cutting-edge brushless motor technology, it's the ultimate sidekick for when you want to re-inflate fast, with zero effort. It’s fully USB-C rechargeable so is re-juiced in a flash (30 minutes, to be exact), and you can switch between Presta and Schrader valves, so it works on most bikes.
Air up and get back to the action...fast.
FEATURES
- Aircraft grade aluminium construction
- Up to 120psi
- Knurled/Anodised head with 2in1 valve pin
- Compatible with both Presta, Schrader and Big Bore valves
- Real-time air pressure and battery level display
- Inflates up to 4 tyres on one charge
- Universal USB-C Connection
- Rechargeable lithium-ion battery
- Supplied with Air Hose for use with plastic valves/TPU tubes, inflatable toy nozzle and ball inflation needle.
-
Protective silicone case
SPECIFICATIONS
- Size: 64.5 x 63 x 28mm
- Weight: 122g without case (142g with case)
- Battery: Lithium-ion 450mAh 7.4V
- Rated Power: 40W
- Working current: 2.5 ~ 7.5 A
- Charging Mode: USB-C (Cable included)
- USB output: 5V 1.5A
- Charging time: 30 minutes fast charge
Featuring a cutting-edge, integrated ball valve system, the valve ensures lightning-fast air flow, turbocharging the sealant filling process. Say goodbye to the hassle of traditional tubeless valves that clog up and require the valve core to be removed to fill sealant and achieve sufficient air flow during tubeless set up.
Our Big Bore Hybrid offers up to 254% higher air flow than traditional Presta valves thanks to the straight through bore design.
With our ball valve construction and integrated lever, you can quickly open and close the valve for effortless airflow control, and even fine tune your pressure whilst you're out riding.
Crafted from 7075 aircraft grade CNC machined aluminium construction with a stainless steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions.
WHAT'S INCLUDED
-
Big Bore Valve: Available in 6 colours and 4 different sizes (60mm available in Black only).
-
Hex Slot Key: 4mm machined hex key slot for easy installation/removal
-
Rubber Bases & O-Rings: Supplied with various rubber bases and O-Rings to optimise fit and seal with multiple rim type
-
Bespoke Spanner: Specifically designed to tighten the big bore body during installation and removal
- Sold Separately: Sealant dipstick also available separately
HOW TO
- Remove Ball Valve: First, remove the ball valve body, cap, locking ring & O-ring from the valve stem.
- Choose Base: Choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Slide this down to the bottom of the valve stem. (If your rim has a larger valve hole and the smaller circular fitment is too loose, use the larger circular fitment to plug the hole).
- Push Valve Stem Into Hole: Now push the valve stem into the hole in the rim and push it right the way through. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.
Looking for an all-weather Essentials Case that's got your back no matter the conditions? One that can stash your phone, essential tools, and puncture repair kits but also fits snugly in your back or side pocket?
Introducing our Waterproof Essentials Case, the ultimate storage solution for cyclists of all terrains, from rugged trails to road. Crafted from durable, waterproof TPU fabric, this case provides the necessary protection for your ride essentials. Its robust rubber-encased rope zip pull ensures quick and hassle-free access while on the move.
Equipped with Molle straps on the back, this case easily attaches to Molle accessories or bags for added convenience. Inside, a ripstop divider keeps your cards separate from your smartphone, or your inner tube neatly apart from multi-tools, CO2 cylinders, and tyre levers. Additionally, there's an internal zipped pocket for smaller valuables like keys and coins, ensuring everything stays secure and organized.
- Weight: 61g
- Dimensions: 175 x 90 x 20 mm
- Material composition: 55% TPU, 45% POLYESTER
FEATURES
- Premium grade waterproof 600D TPU
- Durable, moulded and heat-sealed construction keeps water out
- Waterproof zip with puller*
- Inner ripstop divider
- Zipped internal pocket
- Reflective printed graphics
- Lightweight
** Ensure the zipper puller is securely closed into the zip stop to maintain waterproofing
DESCRIPTION
Copper Compound paste make stuck threaded screw connections and tight metal joints are a thing of the past. Simply apply it to threaded, plug and screw connections that are especially exposed to corrosion. The copper-based assembly paste reliably prevents contact corrosion and resulting damages on threaded connections and metal parts.
Apart from protecting bottom bracket, headset and thru axle threads, the assembly paste also keeps sensitive components running smoothly. It helps reduce friction and thus prevents creaking and cracking noises on seatpost and cranks.
FEATURES
- Copper-based assembly paste.
- For metal connections of steel, titanium, aluminium.
- Protects from corrosion, reduces friction.
- Saltwater resistant.
- Does not attack metal, carbon, plastic and rubber.
- WARNING: Causes serious eye irritation.
- Keep out of reach of children.
- Store in a cool well ventilated area.
- We recommend wearing gloves, wash immediately with plenty of soap and water if contact is made with skin.
These socks make a statement when you are on the trail.
Muc-Off regular length socks are designed for performance and comfort, with a flat toe seam and breathable mesh upper all comprised of a quick drying, moisture wicking fabric.
Made from a polypropylene and lycra blend, which is both breathable and insulating, Muc-Off socks provide the ultimate in shape and comfort.
SIZING
| UK SIZE | EU SIZE | US SIZE | CUFF LENGTH (CM) | CUFF LENGTH (INCHES) |
|---|---|---|---|---|
| 3-5 | 35-38 | 4-6 | 16.5 | 6.5 |
| 6-8 | 39-42 | 7-9 | 17.5 | 7 |
| 9-11 | 43-46 | 10-12 | 18.5 | 7.5 |
A spare back of x10 puncture plugs to help fix punctures when you’re out on a ride. Compatible with all tubeless road, MTB and gravel tyres. Refill packs with 10 repair plugs (5x thin and 5x thick).
When a puncture strikes just too big and gnarly to seal, the Muc-Off Stealth Tubeless Puncture Plug ultimate backup tool that’s cleverly stored inside your bar ends! The expanding silica plugs included cover most MTB, road and gravel handle bar sizes and the premium CNC Machined Aluminium bar ends are available in 12 anodised colours to match your ride.
Each lightweight and durable set contains everything you need to get back riding when you’re stuck battling a hole that’s just not sealing: a stainless steel 2-in-1 puncture plug reamer tool, a variety of different sized tyre worms and a trimming knife.
FEATURES
- CNC Machined from 6061 Aluminium.
- Expanding silica plug fits most MTB, Gravel & Road Handlebars with a larger than 17mm inside diameter.
- Supplied with 17mm, 19mm and 21mm silica plugs to fit different handlebar diameters
- Screws into bars using a just a 4mm Allen key
- Plugs and Repairs multiple holes that won’t seal with just sealant
- Compatible with most open-end grips and drops bars with a 84mm straight section at the bar end.
- Dimensions 89 x 27 x 27mm
- Weight: 33g per side (excluding tyre worms)
- Available in 12 anodised colors to match your Muc-Off tubeless valves
WHAT'S INCLUDED
- Supplied as a pair:
- 1 x Stainless steel 2-in-1 puncture plug/reamer tool
- 1 x knife trimming tool
- Supplied with 5 x thin tyre worms, 5 x medium tyre worms & 5 x thick tyre worms
HOW TO
- Identify the source of the puncture and remove the debris or puncture source
- Remove the tool from your bars using a 4mm Allen key. (If tool is pre-loaded skip to step 5) Start by using the integrated knurled reamer on the tool to clean and roughen up the hole to ensure a perfect seal.
- If the puncture requires the medium or larger worms then ream the hole several times with the knurled area of the tool, make sure you use a 45 degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!
- Now Grab a tyre worm (you may need to use the tool to help slide out the worms). The largest size is for MTB tyres the medium for gravel tyres and the small for road tyres, but you can select the best one for your sized hole. Now pinch one end of the worm hard between your fingers to flatten it out. (If using the thin worm thread through the tip at the end of the tool, not the main larger slot)
- Thread through gap at the end of the tool so the worm is now sitting centrally on the tool.
- Locate the puncture hole then insert the tool through the hole (at a 45 degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!) until the worm is around halfway through the tyre. Ensure the ends of the worm remain on the outside of the tire.
- Turning the tool slowly clockwise a few revolutions to twist the worm inside the tire and slowly pull up to remove – leaving the worm in your tyre and the hole plugged.
- Re-inflate tyre to your desired pressure. (We recommend a max of 80 PSI on a road bike!)
- Finally, using the knife carefully trim the worm ends. We suggest standing on the non-drive side of your bike and cutting away from the bike. Trim plugs down so there is a minimum of 3-5mm still sticking out of the tyre. (Caution – this is one sharp knife so please use with care and always cut away from your body and not too close to your fingers!!
- Now you’re ready to roll!
This kit contains all the spare parts you need for the X-3 Dirty Chain Machine.