Sort by:
DESCRIPTION
Just spray and watch it work its magic! Water beads right off your frame, and with its high oil content it’ll keep corrosion at bay.
FEATURES
- High performance formula leaves dry, non-sticky protective film
- Safe on frame, metal parts, plastics, rubber, paint and carbon fibre
- Drives out excess moisture
- Prevents dirt adhesion
- Light lubricant coats moving parts
- Quick and easy to use
- 500ml Aerosol Spray
HOW TO
- Before applying Bike Protect, ensure your bike's disc brakes are covered using our Disc Brake Covers
- (After cleaning) apply Bike Protect over your entire bike - try to avoid any susepnsion components
- Wipe off any excess using a Microfibre Cloth and leave to dry
TIP: Spray over glossy frames or metal components to keep the elements out and give it a factory finish shine every time. Avoid getting on brakes and suspension components.
If your puncture is too big for a normal patch, then it’s time to reach for a puncture plug. They’re an on-the-go way to repair holes in road, MTB or gravel tyres.
FEATURES
- Compatible with Road Bikes, Gravel Bikes and MTBs with tubeless tyre setups
- Two in one reamer and plug tool
- 10x refill plugs included
WHAT'S INCLUDED
- Puncture Plug
- 10x refill plugs included
- 5x thin plugs
- 5x medium plugs
- 5x thick plugs
- Handy storage case
DESCRIPTION
Introducing the ultimate protection for your indoor trainer or gym equipment. Muc-Off Sweat Protect uses state of the art anti-corrosion additives and inhibitors to provide class leading protection against corrosion. It even works on surfaces that already have rust and corrosion...it simply stops rust in its tracks!
It drives out moisture and leaves a protective anti-corrosive layer on your bike’s frame, metal parts, and paintwork to keep the harmful effects of moisture and sweat at bay.
FEATURES
- The end of corrosion caused by sweat on your training equipment!
- For use all over indoor trainers and all gym equipment
- Prevents and stops corrosion on metal surfaces
- Penetrates and protects
- Non-drying film
- Rust preventing / anti corrosion
- Dissolves rust
- Integral tracer dye – aids accurate application to ensure total protection
- Easy to apply using our ‘Genius Straw’
- Protection lasts up to 3 months*
* We recommend you wash your bike and reapply Sweat Protect periodically to ensure total protection.
HOW TO
- Step 1 - Shake can vigorously. After washing the surface with Muc-Off Equipment Cleaner, apply Sweat Protect to any surface that needs protecting to disperse remaining moisture.
- Step 2 - Spray directly onto the surface and leave in place for a higher level of protection, or for an even thinner coating wipe off any excess fluid with a cloth.
Note: Mask braking surfaces before application. Store in a cool, dry place. Do not apply to tyre tread or braking surfaces.
A quick and easy way to freshen up your chain, so you don’t need to get a new one. Teeth and brushes get into every link to provide a deep clean.
HIGHLIGHTS
- Easily removes grease, grime and chain oil in seconds
- Deepest clean thanks to 120 contact points
- Easy to clean and re-use
- Heavy duty construction that's built to last
- Includes 75ml Muc-Off Drivetrain Cleaner
- Perfect for Road, MTB or Cyclocross bicycle chains
WHAT'S INCLUDED
- Included in the kit is a 75ml measure of Muc-Off Drivetrain Cleaner as well as the X-3 Dirty chain machine.
Muc-Off’s Microcell expanding sponge is contoured to an ergonomic shape for maximum comfort and ease of use. We’ve also vacuum packed it to take up less space and to use less packaging materials. Don’t worry though, once you’ve opened our perfectly pink sponge, it expands into an easy to use, bike and wheel friendly size!
FEATURES
- Compact
- Ergonomic shape for maximum comfort and ease of use
- Vacuum packed
DESCRIPTION
Hydrodynamic Chain Lube is the Ultimate in bicycle chain lubricant technology. If you are looking for the most efficient chain lubricant formula for long distances and/or the harshest of weather conditions, look no further.
Born in 2014 and baptised at the most famous French road race in the world, with the worst weather conditions seen in years, our new Hydrodynamic Chain Lube is the first to be created by the Muc-Off research team in collaboration with Team Sky.
Hand blended in the UK, we used the finest ingredients to create a sophisticated, synergistic blend of esters coupled with aerospace quality based oil lubrication, before packing it with ground-breaking extreme pressure additives. All this means it’s possible to create a high strength film forming lubricant which prevents metal to metal contact to ensure peak performance, even under the most extreme workloads that a pro peloton can throw at it.
Each handmade batch takes hours of painstaking work to deliver a highly advanced bicycle chain lubricant, reaching previously unattainable levels of lubrication and protection.
FEATURES
- Ideal for Road Cycling and Cyclocross
- Provides the ultimate performance in both wet & damp or dry & dusty conditions
- Petroleum free formula for eco protection
- Synthetic polymers for long distance performance
- Incredible durability
- Pipette system for easy application
HOW TO
- 1. Fully de-grease drive chain thoroughly before lube application.
- 2. Ensure drive chain area is dry.
- 3. Shake bottle vigorously and apply a moderate amount of Hydrodynamic lube to the inside chain link, whilst spinning pedals in a reverse motion.
- 4. Ideally apply 3-4 hours before your ride.
- 5. Check to make sure the lube coverage is even using the supplied UV Torch!
- 6. Wipe excess lube carefully
DESCRIPTION
Keep your chain and cassette cleaner than ever with our advanced High-Pressure Quick Drying Degreaser. It makes light work of oil build up, grease and grime, without the need for rinsing.
Its unique dry ‘zero residue’ formula means that after cleaning, it evaporates to leave the area clean as a whistle, with no residue. It rips right through the toughest grime, including waterproof grease and chain lube.
FEATURES
- New high-pressure turbo spray
- Easily cuts through tough grease in seconds
- No rinse, heavy duty formula
- Can be used on chains, gears, mechs and individual components
- Works on the toughest waterproof grease and chain wax
- 750ml
HOW TO
- Use in a well-ventilated area.
- Then use a brush or a rag to agitate any stubborn sections of grime.
- Then your chain will be clean and ready for lubrication or protective treatments.
- If you’re unsure of surface compatibility or if your bike has non factory finishes test a small area before use.
- Store in a cool dry place.
The Muc-Off Bike Care Duo Kit covers Stage 1 and 2 in the Muc-Off cleaning system. Our award winning Nano Tech Bike Cleaner cuts through dirt, mud and grime quickly and safely without the need for acids or dangerous chemicals. Our unique formula is also 100% biodegradable so it's safe for your bike and the planet.
After you've given your bike a good clean with our Nano Tech Bike Cleaner, it's time to add some protection. Muc-Off Bike Protect is the ultimate post-wash water dispersant. Not only does Bike Protect rid your bike's frame and components of moisture, but it also leaves a non-sticky layer of protective to prevent rust and corrosion. It also makes future cleaning and maintenance a breeze.
DANGER: Extremely flammable aerosol. Pressurised container. May burst if heated. Causes serious eye irritation. Keep out of reach of children
FEATURES
Nano Tech Bike Cleaner
- Safe on all parts and surfaces including carbon fibre
- Will not harm seals, cables, brake pads or rotors
- Safe on anodised metal
- Alkaline based and free from CFCs, solvents or acids
- Nano Tech Formula cleans on a molecular level
- Biodegradable*
*Only contents are biodegradable.
Bike Protect
- High performance formula leaves dry, non-sticky protective film
- Safe on frame, metal parts, plastics, rubber, paint and carbon fibre
- Drives out excess moisture
- Prevents dirt adhesion
- Light lubricant coats moving parts
- Quick and easy to use
HOW TO
Nano Tech Bike Cleaner
- Rinse bike thoroughly before applying Nano Tech Bike Cleaner
- Spray Nano Tech Bike Cleaner onto the entire bike including components and leave for 3-5 minutes
- Agitate any stubborn grime with a brush or sponge
- Rinse entire bike thoroughly with fresh, clean water
Bike Protect
- After washing your bike with Muc-Off Nano Tech Bike Cleaner, apply Bike Protect to disperse remaining moisture
- Wipe away any excess fluid and leave to dry
The Muc-Off Crank Preload Ring is a super durable, precision CNC machined 7075 piece of hardware.
It allows you to precisely adjust the ‘preload’ tension on the bottom bracket bearings. What does this do? It helps to remove the side-to-side play and slack in thru-spindle bottom brackets, to help maximise the life of your bottom bracket bearing, as well as giving you a creak-free ride. It also comes in our classic anodised colours for added bling!
It fits onto the left crank arm of any mountain, gravel or road bikes that have SRAM, RaceFace or Easton 30mm spindle cranks, or SRAM DUB 28.99mm spindles installed.
Our precision crank pre-load ring fits onto the left crank arm of:
- Mountain bikes
- Gravel bikes
- Road bikes
that have:
- SRAM 30mm spindle cranks
- Race Face 30mm spindle crank
- Easton 30mm spindle cranks
- SRAM DUB 28.99mm Spindles installed
- UNITE 30mm spindle cranks
FEATURES
- Precision CNC machined, 7075 aluminium body and threaded adapter ring for a perfect fit
- Stainless steel hardware
- Allows you to precisely adjust the preload tension on the bottom bracket to help extend the life of your bb bearing!
HOW TO
SRAM 30MM SPINDLES
Tools required: Alongside your usual bike tools required to remove your cranks, you’ll also need a bottle of thread lock (Loctite 638 or similar).
- Place the bike in a bike stand.
- Either remove the chain completely or remove it from the front chainring.
- Remove the entire crankset according to manufactures instructions.Loosen the bolt on the OEM crank ring with an appropriately sizedtool.
- Turn the ring clockwise one full turn.
- Tighten the bolt.
- Pull on the crank ring to remove the entire assembly, including thespacer ring.
- Place the OEM crank ring to one side, this will not be reused.
- Clean the crank spindle thoroughly using Muc-Off Bio Degreaser.
- Unbox the ‘Muc-Off Crank Pre-Load Ring’.
- Slide the appropriate Muc-Off spacer ring onto the crank spindle.
- Check you have the correct size installed, it should be a tight fit, the spacer ring should not wobble.
- Remove the spacer ring and apply a small amount of thread lock to the area of the spindle where the spacer ring will be located.
- Slide the spacer ring back onto the spindle.
- Wipe away any excess thread lock - Avoid getting any onto thethreads.
- Rotate the spacer half a turn to ensure good thread lock coverage
- Leave the thread lock to set for 24 hours.
- Screw the Pre-Load Ring onto the spacer until it’s finger tight.
- Reinstall the crankset onto the bike.
- Unscrew the Preload Ring following the directional arrows, until ittouches the bottom bracket bearing.This does not need to be tight,just enough to stop the crankset frommoving.
- Tighten the stainless bolt to 1Nm torque with a 2mm Hex Key.
- Give the cranks a spin to ensure everything is moving smoothly. Ifthere is too much resistance, loosen the bolt and back off the Preload Ring slightly.
Periodically spray a protectant such as HCB-1, MO-94 or Bike Spray onto body to ensure there is zero corrosion.
RACEFACE®
Tools required: Alongside your bike tools to remove your cranks you will also require a bottle of thread lock (Loctite 638 or similar)
- Place the bike in a bike stand
- Either remove the chain completely or remove it from the front chainring.
- Remove the entire crankset according to manufacture instructions. Loosen the bolt on the Raceface crank ring with an appropriately sized tool.
- Unscrew the existing Raceface preload ring and remove it from the spindle.
- Place the OEM crank ring to one side, this will not be reused.
- Clean the crank spindle thoroughly using Muc-Off Bio Degreaser.
- Unbox the Muc-Off Crank Preload Ring.
- Screw the Preload ring onto the spacer until it is finger tight. (You will not need a spacer ring.)
- Reinstall the crankset to the bike.
- Unscrew the Preload Ring in the direction the arrows shows until it touches the bottom bracket bearing. This does not need to be tight, just enough to stop the crankset from moving.
- Tighten the stainless bolt to 1Nm torque with a 2mm Hex Key
- Give the cranks a spin to ensure everything is moving smoothly. If there is too much resistance, loosen the bolt and back off the Preload Ring slightly. RACE FACE® is a registered trademark. SRAM™ is a registered trademark.
Periodically spray a protectant such as HCB-1, MO-94 or Bike Spray onto body to ensure there is zero corrosion.
DESCRIPTION
- The lightest sport bottle available worldwide.
- The FLY bottle has unique characteristics of lightness, softness, liquid flow and odourless that make it unique in the panorama of water bottles for sport use.
- With ergonomic cap and it’s multi-material made. It guarantees an increased and easier liquid flow.
FEATURES
- BPA free
- 100% recyclable
- The lightest sport bottle available worldwide
- Odorless, soft and durable plastic material
- With ergonomic cap and it’s multi-material made. It guarantees an increased and easier liquid flow
- Diameter 74 mm
- 550 and 750 ml capacity
DESCRIPTION
C3 Dry Ceramic Chain Lube raises the bar when it comes to providing the ultimate lubrication. It provides total corrosion protection and unparalleled performance in dry, dusty and damp conditions. With added nano ceramic particles and synthetic polymers, C3 Dry Ceramic Chain Lube maximises your power output by reducing metal to metal contact to a ground breaking, low level and provides up to 10 times the performance of conventional chain oils and lubes. The Muc-Off R&D team definitely didn’t cut corners when they brought the future of bike lubes to the masses.
In fact, our team made sure the C3 Dry Ceramic Lube is safe by creating a biodegradable, petroleum free formula so you don’t have to worry about yourself, your bike or the planet. The new C3 Dry Ceramic Lube is available in 50ml and 120ml so whether you’re in the workshop, on the road or hitting the trails, we’ve got you covered.
FEATURES
- Ideal for Road Cycling, Cyclocross & MTB
- Provides the ultimate performance in damp, dry & dusty conditions
- Petroleum free formula for eco protection
- Ceramic coating for increased drive chain protection
- Synthetic polymers for long distance performance
- Incredible durability
- Pipette system for easy application
- Includes UV torch to check for 100% coverage
DESCRIPTION
Let’s not beat around the bush, you want a high quality polish and protectant that delivers a deep and luxurious shine for your bodywork or frame, Muc-Off Miracle Shine is the product for that job. Not only does our Miracle Shine give you amazing reflective results – but it also covers the treated areas with a microscopic protective layer against atmospheric pollutants, thanks to it’s Fluoro Polymer Technology!
Our luxurious polish also includes Carnauba Wax as well as other highly advanced ingredients so that your paintwork is treated with love and respect. So if you want your paint finish to gleam like new, make the water bead away furiously and make the car easier to clean next time, Muc-Off Miracle Shine is the product for you.
FEATURES
- Removes imperfections and fills minor scratches
- Flouro Polymer technology creates a microscopic layer of protection
- Repels water and atmospheric pollutants
- Reduces washing and maintenance time
- Silicon oils allow easy application and incredible depth of shine
- Will not leave a powdery white residue
- Safe on paintwork, clear coat, carbon fibre, chrome, metal & plastics
Take your bike cleaning regime to the next level with our versatile, quality and great value 5 Premium Brush Kit. Ideal for agitating dirt while caring for your bike's delicate finish.
HIGHLIGHTS
- Premium brushes with ergonomic design
- 5 brushes specifically designed for bikes
- Ideal for giving your bike an all-over clean
WHAT'S INCLUDED
- Soft Washing Brush
- Detailing Brush
- Claw Brush
- Wheel & Component Brush
- Two Prong Brush
DESCRIPTION
Keep your precious steed in tip-top condition with the Muc-Off Harsh Condition Barrier. With a state-of-the-art thin film coating, it’ll make light work of rust and corrosion. It’s the perfect upgrade for winter months, or to keep your bike looking fresh all year long – as you’ll have 12 months of protection.
This innovative product is a must-have. It’ll keep moisture out, creating a durable anticorrosive layer of protection on your bike’s frame, chain, metal parts, plastics and paintwork. And on parts that have already got some rust showing, it’ll get rid of it altogether.
To make it super easy to check that you’re protected, we’ve added a UV dye. With a UV light* you can check it’s correctly in place and ready to protect your bicycle, e-bike or motorcycle. So you can get out there and enjoy the ride, no matter what the weather.
*UV light sold separately
FEATURES
- Quick and easy to apply
- Dissolves existing rust
- 300+ hours salt spray to ASTM B-117
- Thin transparent film
- Strong capillary action allows the product to get into tight cracks and crevices
- Contains UV application dye to ensure complete protection
- Resistant to hot, cold and salt-water
- Ideal for use in harsh environments
- Creates a self-healing barrier, active for up to 12 months
- Safe to use on electrical components, paintwork and most rigid plastic trim
- Contains no wax silicon, Teflon or water
- Perfect for bicycles, e-bikes and motorcycles
HOW TO
- Thoroughly wash and dry the surface before applying. It’s a good idea to test a small area for surface compatibility before complete coverage.
- Before using, make sure the surface you are spraying on is cool and out of direct sunlight.
- Shake the can to activate the formula. You can use the extension straw for a more precise application.
- Apply a thin, even film of spray on the surface you want to protect* and allow it to dry completely. You may need to wait up to 24 hours to allow it cure, which will offer the best protection.
- Check to make sure the coverage is even using the UV torch (sold separately)
*Just remember not to apply Harsh Condition Barrier to tyre treads and braking surfaces.
DESCRIPTION
Designed specifically for use on bikes, Muc-Off Bio Grease possesses a unique formula that prevents corrosion and water ingress so your bike’s components will last long into the future! Use Muc-Off Bio Grease to increase your performance, and ensure every ride will be smoother than your last.
Muc-Off Biodegradable Bicycle Grease is specifically blended for the unique ‘low speed’ applications found on bicycle parts where reducing friction is paramount.
This premium formulation is based on renewable resources, and has a combination of extreme pressure lubricity additives and natural ‘slip’ giving it unrivalled performance in its class!
Bio Grease also has the added benefit of being readily biodegradable* and extremely resistant to water wash off, which helps prevent corrosion, reduce friction and improve the performance of moving parts.
At Muc-Off we are dedicated to making eco friendly products that won’t harm you, your bike or the planet, and Bio Grease is no exception. This grease is fully biodegradable and free from any nasty petroleum based oils!
NOT for use on bicycle chains.
*Only contents are biodegradable.
FEATURES
- Biodegradable ultra slippery formula
- Suitable for use on titanium parts
- Resistant to water "wash off"
- Reduce friction and improve performance of moving parts
- Operating Temperature Range: -20 °C to +120°C
DESCRIPTION
The guys here at Muc-Off HQ have been racking their brains to come up with a solution for carbon fibre bike parts slipping. Whether it's your Carbon seatpost having a mind of its own or your Carbon stem is struggling to grip your handle bars, our mad scientists have come up with the answer. May we introduce the all-new, highly advanced Carbon Gripper!
Put simply, the Muc-Off team have created a highly efficient carbon fibre assembly compound that is essential for preventing over-tightening and creating a secure ‘mating friction’ between carbon surfaces or indeed carbon to metal parts.
Designed for mechanics and riders building their own bike, the Muc-Off Carbon Gripper creates friction between carbon fibre clamping areas and lowers clamping torque thus decreasing the chance of fatigue, internal fractures or shortening component life.
So get your money’s worth out of your carbon fibre parts. Use Muc-Off Carbon Gripper!
FEATURES
- Keeps Carbon parts gripped
- 'Non slip' surface to surface formula
- Specifically designed for Carbon Fibre parts
HOW TO
- Apply a thin layer of Carbon Gripper to fibre clamping areas
- Spread the Carbon Gripper evenly
- Wipe away any excess
DESCRIPTION
The world’s first plastic-free bike cleaner: Punk Powder! A seriously powerful formula with sustainability built in, that has the same epic power of our O.G pink bike cleaner, makes light work of muck and grime.
FEATURES
- Makes 4x litres of bike cleaner (contains 4 satchets, each satchet makes 1 litre of bike cleaner)
- 100% plastic and petroleum free packaging
- Safe to use on all parts, including disc brakes & carbon fibre
HOW TO
- Grab your empty old bottle of Muc-Off. (You may need a pair of adjustable pliers to remove the trigger from the bottle). Or purchase our Bottle for Life.
- Fill up to the shoulders of the bottle with 1 litre of lukewarm water for faster formula activation!
- Carefully cut one corner of the sachet open along the diagonal cut lines.
- You can carefully pour the sachet straight into the top of the bottle. Or using the box, fold the inside of the lid together using the printed lines as a guide and use this as a funnel to pour the powder into your bottle. (Please see our video for full instructions on this.
- Screw your spray trigger back onto the top of the bottle. Ensure it’s tight!
- Shake the bottle vigorously for 30-60 seconds to activate the formula. If you notice any undissolved powder simply keep shakin’ it!
- Go clean that filthy bike!
DESCRIPTION
Finally, the solution to protecting your disc brakes during maintenance or transit is here! Our Patented design makes life easy, they are fast and easy to use and help to ensure you won’t have protectant or lube overspray on your discs. The end is nigh for loss of braking power from protectant overspray! Finally!
FEATURES
- Protects disc brake rotors and pads from protectant and lube overspray
- Protects discs during transit
- Quick and easy to use
- Fits all road/mtb rotors
- Simply rinse and use again
- Breathable neoprene
- Protects against corrosion
- Supplied as a pair