Sort by:
6 pro quality, chrome vanadium steel hex wrenches. Single ball end on 4 / 5 / 6 mm wrenches for hard to reach and blind locations. Ergo padded handle for increased grip and comfort while handling.
| HEX WRENCHES | 2 / 2.5 / 3 / 4 / 5 / 6 mm |
| TOOL MATERIAL | SNCM-V steel / Chrome vanadium steel |
| HANDLE | Ergonomic plastic handle |
| SIZE | 14 x 7.8 x 1.6 cm / 5.5” x 3.1” x 0.6” (2 / 2.5 / 3 / 4 mm) 20 x 9.7 x 2 cm / 7.9” x 3.8” x 0.8” (5 / 6 mm) |
| WEIGHT | 14 g / 0.49 oz (2 mm), 17 g / 0.60 oz (2.5 mm) 21 g / 0.74 oz (3 mm), 29 g / 1.02 oz (4 mm) 64 g / 2.25 oz (5 mm), 80 g / 2.82 oz (6 mm) |
DESCRIPTION
Hydrodynamic Chain Lube is the Ultimate in bicycle chain lubricant technology. If you are looking for the most efficient chain lubricant formula for long distances and/or the harshest of weather conditions, look no further.
Born in 2014 and baptised at the most famous French road race in the world, with the worst weather conditions seen in years, our new Hydrodynamic Chain Lube is the first to be created by the Muc-Off research team in collaboration with Team Sky.
Hand blended in the UK, we used the finest ingredients to create a sophisticated, synergistic blend of esters coupled with aerospace quality based oil lubrication, before packing it with ground-breaking extreme pressure additives. All this means it’s possible to create a high strength film forming lubricant which prevents metal to metal contact to ensure peak performance, even under the most extreme workloads that a pro peloton can throw at it.
Each handmade batch takes hours of painstaking work to deliver a highly advanced bicycle chain lubricant, reaching previously unattainable levels of lubrication and protection.
FEATURES
- Ideal for Road Cycling and Cyclocross
- Provides the ultimate performance in both wet & damp or dry & dusty conditions
- Petroleum free formula for eco protection
- Synthetic polymers for long distance performance
- Incredible durability
- Pipette system for easy application
HOW TO
- 1. Fully de-grease drive chain thoroughly before lube application.
- 2. Ensure drive chain area is dry.
- 3. Shake bottle vigorously and apply a moderate amount of Hydrodynamic lube to the inside chain link, whilst spinning pedals in a reverse motion.
- 4. Ideally apply 3-4 hours before your ride.
- 5. Check to make sure the lube coverage is even using the supplied UV Torch!
- 6. Wipe excess lube carefully
DESCRIPTION
Keep your chain and cassette cleaner than ever with our advanced High-Pressure Quick Drying Degreaser. It makes light work of oil build up, grease and grime, without the need for rinsing.
Its unique dry ‘zero residue’ formula means that after cleaning, it evaporates to leave the area clean as a whistle, with no residue. It rips right through the toughest grime, including waterproof grease and chain lube.
FEATURES
- New high-pressure turbo spray
- Easily cuts through tough grease in seconds
- No rinse, heavy duty formula
- Can be used on chains, gears, mechs and individual components
- Works on the toughest waterproof grease and chain wax
- 750ml
HOW TO
- Use in a well-ventilated area.
- Then use a brush or a rag to agitate any stubborn sections of grime.
- Then your chain will be clean and ready for lubrication or protective treatments.
- If you’re unsure of surface compatibility or if your bike has non factory finishes test a small area before use.
- Store in a cool dry place.
- Suspension air pump
- Up to 300 / 600 PSI
- Schrader valve
The Muc-Off Bike Care Duo Kit covers Stage 1 and 2 in the Muc-Off cleaning system. Our award winning Nano Tech Bike Cleaner cuts through dirt, mud and grime quickly and safely without the need for acids or dangerous chemicals. Our unique formula is also 100% biodegradable so it's safe for your bike and the planet.
After you've given your bike a good clean with our Nano Tech Bike Cleaner, it's time to add some protection. Muc-Off Bike Protect is the ultimate post-wash water dispersant. Not only does Bike Protect rid your bike's frame and components of moisture, but it also leaves a non-sticky layer of protective to prevent rust and corrosion. It also makes future cleaning and maintenance a breeze.
DANGER: Extremely flammable aerosol. Pressurised container. May burst if heated. Causes serious eye irritation. Keep out of reach of children
FEATURES
Nano Tech Bike Cleaner
- Safe on all parts and surfaces including carbon fibre
- Will not harm seals, cables, brake pads or rotors
- Safe on anodised metal
- Alkaline based and free from CFCs, solvents or acids
- Nano Tech Formula cleans on a molecular level
- Biodegradable*
*Only contents are biodegradable.
Bike Protect
- High performance formula leaves dry, non-sticky protective film
- Safe on frame, metal parts, plastics, rubber, paint and carbon fibre
- Drives out excess moisture
- Prevents dirt adhesion
- Light lubricant coats moving parts
- Quick and easy to use
HOW TO
Nano Tech Bike Cleaner
- Rinse bike thoroughly before applying Nano Tech Bike Cleaner
- Spray Nano Tech Bike Cleaner onto the entire bike including components and leave for 3-5 minutes
- Agitate any stubborn grime with a brush or sponge
- Rinse entire bike thoroughly with fresh, clean water
Bike Protect
- After washing your bike with Muc-Off Nano Tech Bike Cleaner, apply Bike Protect to disperse remaining moisture
- Wipe away any excess fluid and leave to dry
The featherlight, matte natural finish, carbon fiber composite ø5.5mm tube cage offers high strength and optimized geometry for lighter weight. Includes two aluminum bolts ready to mount and enjoy on your ride.
Black: Carbon composite fibers
Red/Blue/Yellow: Carbon and Kevlar® composite fibers
The Muc-Off Crank Preload Ring is a super durable, precision CNC machined 7075 piece of hardware.
It allows you to precisely adjust the ‘preload’ tension on the bottom bracket bearings. What does this do? It helps to remove the side-to-side play and slack in thru-spindle bottom brackets, to help maximise the life of your bottom bracket bearing, as well as giving you a creak-free ride. It also comes in our classic anodised colours for added bling!
It fits onto the left crank arm of any mountain, gravel or road bikes that have SRAM, RaceFace or Easton 30mm spindle cranks, or SRAM DUB 28.99mm spindles installed.
Our precision crank pre-load ring fits onto the left crank arm of:
- Mountain bikes
- Gravel bikes
- Road bikes
that have:
- SRAM 30mm spindle cranks
- Race Face 30mm spindle crank
- Easton 30mm spindle cranks
- SRAM DUB 28.99mm Spindles installed
- UNITE 30mm spindle cranks
FEATURES
- Precision CNC machined, 7075 aluminium body and threaded adapter ring for a perfect fit
- Stainless steel hardware
- Allows you to precisely adjust the preload tension on the bottom bracket to help extend the life of your bb bearing!
HOW TO
SRAM 30MM SPINDLES
Tools required: Alongside your usual bike tools required to remove your cranks, you’ll also need a bottle of thread lock (Loctite 638 or similar).
- Place the bike in a bike stand.
- Either remove the chain completely or remove it from the front chainring.
- Remove the entire crankset according to manufactures instructions.Loosen the bolt on the OEM crank ring with an appropriately sizedtool.
- Turn the ring clockwise one full turn.
- Tighten the bolt.
- Pull on the crank ring to remove the entire assembly, including thespacer ring.
- Place the OEM crank ring to one side, this will not be reused.
- Clean the crank spindle thoroughly using Muc-Off Bio Degreaser.
- Unbox the ‘Muc-Off Crank Pre-Load Ring’.
- Slide the appropriate Muc-Off spacer ring onto the crank spindle.
- Check you have the correct size installed, it should be a tight fit, the spacer ring should not wobble.
- Remove the spacer ring and apply a small amount of thread lock to the area of the spindle where the spacer ring will be located.
- Slide the spacer ring back onto the spindle.
- Wipe away any excess thread lock - Avoid getting any onto thethreads.
- Rotate the spacer half a turn to ensure good thread lock coverage
- Leave the thread lock to set for 24 hours.
- Screw the Pre-Load Ring onto the spacer until it’s finger tight.
- Reinstall the crankset onto the bike.
- Unscrew the Preload Ring following the directional arrows, until ittouches the bottom bracket bearing.This does not need to be tight,just enough to stop the crankset frommoving.
- Tighten the stainless bolt to 1Nm torque with a 2mm Hex Key.
- Give the cranks a spin to ensure everything is moving smoothly. Ifthere is too much resistance, loosen the bolt and back off the Preload Ring slightly.
Periodically spray a protectant such as HCB-1, MO-94 or Bike Spray onto body to ensure there is zero corrosion.
RACEFACE®
Tools required: Alongside your bike tools to remove your cranks you will also require a bottle of thread lock (Loctite 638 or similar)
- Place the bike in a bike stand
- Either remove the chain completely or remove it from the front chainring.
- Remove the entire crankset according to manufacture instructions. Loosen the bolt on the Raceface crank ring with an appropriately sized tool.
- Unscrew the existing Raceface preload ring and remove it from the spindle.
- Place the OEM crank ring to one side, this will not be reused.
- Clean the crank spindle thoroughly using Muc-Off Bio Degreaser.
- Unbox the Muc-Off Crank Preload Ring.
- Screw the Preload ring onto the spacer until it is finger tight. (You will not need a spacer ring.)
- Reinstall the crankset to the bike.
- Unscrew the Preload Ring in the direction the arrows shows until it touches the bottom bracket bearing. This does not need to be tight, just enough to stop the crankset from moving.
- Tighten the stainless bolt to 1Nm torque with a 2mm Hex Key
- Give the cranks a spin to ensure everything is moving smoothly. If there is too much resistance, loosen the bolt and back off the Preload Ring slightly. RACE FACE® is a registered trademark. SRAM™ is a registered trademark.
Periodically spray a protectant such as HCB-1, MO-94 or Bike Spray onto body to ensure there is zero corrosion.
Description:
Chain holder suitable for both thru-axles and quick releases.
DESCRIPTION
- The lightest sport bottle available worldwide.
- The FLY bottle has unique characteristics of lightness, softness, liquid flow and odourless that make it unique in the panorama of water bottles for sport use.
- With ergonomic cap and it’s multi-material made. It guarantees an increased and easier liquid flow.
FEATURES
- BPA free
- 100% recyclable
- The lightest sport bottle available worldwide
- Odorless, soft and durable plastic material
- With ergonomic cap and it’s multi-material made. It guarantees an increased and easier liquid flow
- Diameter 74 mm
- 550 and 750 ml capacity
DESCRIPTION
C3 Dry Ceramic Chain Lube raises the bar when it comes to providing the ultimate lubrication. It provides total corrosion protection and unparalleled performance in dry, dusty and damp conditions. With added nano ceramic particles and synthetic polymers, C3 Dry Ceramic Chain Lube maximises your power output by reducing metal to metal contact to a ground breaking, low level and provides up to 10 times the performance of conventional chain oils and lubes. The Muc-Off R&D team definitely didn’t cut corners when they brought the future of bike lubes to the masses.
In fact, our team made sure the C3 Dry Ceramic Lube is safe by creating a biodegradable, petroleum free formula so you don’t have to worry about yourself, your bike or the planet. The new C3 Dry Ceramic Lube is available in 50ml and 120ml so whether you’re in the workshop, on the road or hitting the trails, we’ve got you covered.
FEATURES
- Ideal for Road Cycling, Cyclocross & MTB
- Provides the ultimate performance in damp, dry & dusty conditions
- Petroleum free formula for eco protection
- Ceramic coating for increased drive chain protection
- Synthetic polymers for long distance performance
- Incredible durability
- Pipette system for easy application
- Includes UV torch to check for 100% coverage
DESCRIPTION
Let’s not beat around the bush, you want a high quality polish and protectant that delivers a deep and luxurious shine for your bodywork or frame, Muc-Off Miracle Shine is the product for that job. Not only does our Miracle Shine give you amazing reflective results – but it also covers the treated areas with a microscopic protective layer against atmospheric pollutants, thanks to it’s Fluoro Polymer Technology!
Our luxurious polish also includes Carnauba Wax as well as other highly advanced ingredients so that your paintwork is treated with love and respect. So if you want your paint finish to gleam like new, make the water bead away furiously and make the car easier to clean next time, Muc-Off Miracle Shine is the product for you.
FEATURES
- Removes imperfections and fills minor scratches
- Flouro Polymer technology creates a microscopic layer of protection
- Repels water and atmospheric pollutants
- Reduces washing and maintenance time
- Silicon oils allow easy application and incredible depth of shine
- Will not leave a powdery white residue
- Safe on paintwork, clear coat, carbon fibre, chrome, metal & plastics
Integrated chain hook holds links during assembly and chain wear indicator provides precise chain measurement for maintenance.
| TOOL MATERIAL | Hardened steel |
| SIZE | 10.9 x 2.2 x 1.8 cm / 4.3” x 0.9” x 0.7” |
| WEIGHT | 9.6 g / 0.34 oz |
Fits Shimano®, SRAM® and other cassette lockrings. Fits Shimano® center lock disc brake lockrings * Shimano® is a registerted trademark of Shimano Inc. * SRAM® is a registerted trademark of SRAM Inc.
| TOOL MATERIAL | Hardened steel |
| SIZE | 4.4 x ø2.4 cm / 1.7” x ø1” |
| WEIGHT | 59 g / 2.08 oz |
An award winning 21 functions multi-tool with updated design to store T15, T25, 8mm hex tool bits and side mounted tire levers securely. Includes self-tightening tool (T25 Torx® bit) and Presta Core Tool to tighten or remove two-piece Presta valve cores. The Hexus® X is an excellent choice for both road and mountain bike riders.
NOTE:
＊The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo® hollow pin chains.
| FUNCTIONS | 21 |
| TOOLS | Allen wrenches - 2 / 2.5 / 3 / 4 (2 pcs) / 5 / 6 mm tool bit - 8 mm hex Torx® bits - T15 / T25 Torx® wrench - T30 #2 Phillips screw driver, 14G / 15G spoke wrenches, steel wire chain hook, 2 engineering grade polymer tire levers, Presta Core Tool and CrMo steel chain tool |
| TOOL MATERIAL | Chrome vanadium steel |
| ADDED FEATURES | Secondary chain link fence, self-tightening tool and chain pin breaker |
| SIZE | 9 x 4 x 2.7 cm / 3.5” x 1.6” x 1.1” |
| WEIGHT | 170 g / 6.0 oz |
8 pro quality, SNCM-V steel Torx® wrenches. Includes a foldable hanger for hanging the wrench set on wall for storage.
| TORX® WRENCHES | T7 / T9 / T10 / T15 / T20 / T25 / T27 / T30 |
| TOOL MATERIAL | SNCM-V steel |
| SIZE | 16.5 x 6.6 x 1.2 cm / 6.5” x 2.6” x 0.5” |
| WEIGHT | 130 g / 4.58 oz |
For 27.5"/29” Wheel w/ disc brakes Tubular aluminum rack is disc brake compatible. Fast, easy mounting of BabySeat™ II without use of tools. QuickTrack® system compatible with all Topeak MTX TrunkBags and rear baskets.
| Material | 6061 T-6 hollow aluminum |
| Bag Compatibility | MTX QuickTrack® system |
| Added Features | Solid fender top, RedLite® Mount, Tail Light Mount |
| Size | 42.5 x 34 x 23 cm / 16.7” x 13.4” x 9” |
| Weight | 668 g / 1.47 lb |
| Max Weight Capacity | 27 kg / 60 lb, Meets EN 14872 / ISO 11243 |
| Attachment | Braze-on type |
An aluminum air chamber with inflator head that stores an air charge of one liter, up to 200 psi / 14 bar. Works with a floor pump to quickly fill your tires and ensures proper installation on a tubeless rim at home. Once you flip the selector from “CHARGE” to “INFLATE” mode, air bypasses the chamber as you use the floor pump to inflate your tire to the perfect pressure. An integrated flexible hose with pump head works with Presta and Schrader valves and takes stress off the valve stem while pumping.
| PUMP HEAD COMPATIBILITY | Presta pumps |
| TIRE VALVE COMPATIBILITY | Presta / Schrader valves |
| AIR CHAMBER | One liter, Store up to 200 psi / 14 bar air pressure (Varies with the pump capacity) Working Pressure - 1800 psi / 124 bar |
| MATERIAL | Aluminum / Rubber / Engineering grade polymer |
| ADDED FEATURE | Flexible hose |
| SIZE | 36 x 11.4 x 8.6 cm cm / 14.2” x 4.5” x 3.4” (Total) 28.5 x ø8.1 cm / 11.2” x ø3.2” (Air chamber) |
| WEIGHT | 985 g / 2.17 oz (Total) 820 g / 1.81 lb (Air chamber) |
| HOSE LENGTH | 26 |
Take your bike cleaning regime to the next level with our versatile, quality and great value 5 Premium Brush Kit. Ideal for agitating dirt while caring for your bike's delicate finish.
HIGHLIGHTS
- Premium brushes with ergonomic design
- 5 brushes specifically designed for bikes
- Ideal for giving your bike an all-over clean
WHAT'S INCLUDED
- Soft Washing Brush
- Detailing Brush
- Claw Brush
- Wheel & Component Brush
- Two Prong Brush