Sort by:
DESCRIPTION
Braving the elements? Then grab our new Rain Shield Re-proofer spray. It creates a cutting edge DWR (Durable Water Repellent) layer on all types of technical clothing.
It is a simple to use ‘spray on’ waterproofing treatment, designed to restore factory levels of performance on all waterproof and breathable fabrics. It uses the latest technology to reduce the surface tension of the fabric and provide the very best waterproofing without impacting the breathability of fabrics. It also helps to protect against mud and ground-in stains. And the best bit? It’s safe for the environment, as it’s water-based and doesn't contain PFCs!
Our state-of-the-art ‘spray on’ formula gives unrivalled protection within 24 hours of treatment. After application, water will bead and roll off, so you’re protected to go and get rad in the harshest of conditions.
FEATURES
- PFC free, water-based formula
- Not harmful for the environment or to you
- Helps to repel wet mud and grime and protects against ground-in stains
- Will not impact breathability of garments
- Extends life and performance of garments
- Easy to apply, supplied in a spray bottle
- Can be used on any technical or waterproof/water repellent fabric including Goretex®, Polartec®, Pertex®, eVent®, softshell clothing, hardshell clothing and down-filled garments
- Will treat 1-2 garments per bottle!
HOW TO
- Shake bottle well before use to activate the formula.
- Spray all over a clean, damp garment from 10-15cm away until garment is fully treated. (We would recommend using a technical performance wash to clean the garment before application. Always follow the washing instructions on the label.). We recommend spraying in a well-ventilated, dry area.
- Remove any excess treatment with a clean cloth.
- . Allow treatment to cure. Air dry by hangingup and leave to dry overnight before wearing garment in wet conditions again.
- The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with re-proofer. Best applied to a clean, damp garment for optimum results.
DESCRIPTION
Introducing the World's first pressure washer designed and built purely for cleaning both bicycles and motorcycles.
The Muc-Off Pressure Washer Bicycle Bundle includes all you need to get your bike back to that factory fresh look while also looking out for those delicate bearings, surfaces and suspension parts. Our pressure washer bundle features three lances to cater for specific cleaning needs, as well as a Snow Foam Lance to transform your bottle of Nano Tech Bike Cleaner into the ultimate dirt destroying snow foam.
A waterproof Dry Bag is also included. All you need is a power source and water supply and you'll be able to give your pride and joy the ultimate deep clean it deserves!
PRODUCT INFORMATION
THIS UNIT IS INTENDED FOR USE WITH COLD WATER ONLY! DO NOT USE HOT WATER IN THIS PRESSURE WASHER.
- Operate the pressure washer at no more than the fluid pressure rated for the pressure washer.
Never run the pressure washer without a water supply. Running the unit without a water supply will cause irreparable damage to the unit. - Make sure that the water supply you use for the pressure washer is not dirty, sandy, and does not hold any corrosive chemical products. Using a dirty water supply will compromise the long life of the pressure washer.
- NEVER move the unit by pulling on the hose. Use the handle provided on the top of the unit.
IMPORTANT SAFETY TIPS:
- Never point the pressure nozzle at people or animals.
- Never drink alcohol or use drugs while operating the pressure washer.
- Never operate the pressure washer while standing in water.
- Never touch the electrical plug with wet hands.
- Never let electrical connections rest in water.
- Never operate pressure washer without the water turned on.
- Never use hot water with this pressure washer.
IMPORTANT SAFETY PRECAUTIONS
WARNING: When using this product, basic precautions should always be followed, including the following:
- Read all instructions before using the product. Please keep all safety instructions.
- Do not operate the pressure washer when fatigued or under the influence of alcohol or drugs.
- Risk of injection or injury – do not direct the water stream at people or animals.
- Do not allow children to operate the pressure washer at any time.
- To reduce the risk of injury, please take extra care when the pressure washer is used near children.
- Know how to stop the unit and reduce pressure immediately. Be completely familiar with the controls.
- Stay alert – always be aware of where you are directing the spray.
- Keep cleaning area clear of people.
- Keep a good footing and balance at all times – do not overreach or stand on an unstable surface.
- The work area should have adequate drainage to reduce the possibility of a fall due to slippery surfaces.
- Follow the maintenance instructions specified in this manual.
- To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands.
FEATURES
PRESSURE WASHER
- Motor Power: 1200W
- Volt/Freq: 220-240V~50/60Hz
- Motor Type: Carbon brush motor
- Rated Pressure: 70 bar
- Permissible Pressure: 100 bar
- Max. Inlet Water Pressure: 1.2 MPa
- Rated Flow: 5.5L/min
- Max. Flow: 6.5L/min
- Max. Water Temperature: 50°C
- Water Protection Class: IPX5
- N.W. / G/W.: 5.5/6.2 kgs
- Carton Size: 290 x 265 x 413mm
- Power Lead Length: 5M
DRY BAG
- 30L capacity
- Waterproof PVC construction
- Heavy duty grab handles
- Front storage pocket
- Rear and side accessory nets
SNOW FOAM LANCE
- Custom lance fits directly onto the top of your bottle of Muc-Off Nano Tech Bike Cleaner, Muc-Off Nano Gel Concentrate or 1L Snow Foam meaning no additional bottle is required to mix or dilute.
- Top Dial Adjusts level of foam concentration but adjusting the water flow rate and mixing with the cleaner in your bottle.
- Produces high quality, thick snow foam.
- Soft touch coated.
WHAT'S INCLUDED
PRESSURE WASHER: Specifically designed to be safe for use on your bike, so you can get all the benefits of a thorough clean with far less effort!
PRESSURE WASHER DRY BAG: The custom waterproof dry bag carry case is designed to easily store the Muc-Off Pressure Washer and keep available peripherals within easy reach and safe from tripping over in your garage!
SNOW FOAM LANCE: To go alongside the pressure washer, we’ve designed a specific low-pressure snow foam lance that won’t damage any delicate parts but transforms your bottle of Muc-Off Nano Tech Bike Cleaner into thick snow foam for the ultimate and efficient deep clean.
BICYCLE CLEANING LANCE: A bicycle specific cleaning lance that's powerful enough to blast dirt and grime from your bike, while still being safe to use on bearings and suspension parts.
MOTORCYCLE CLEANING LANCE: A motorcycle specific cleaning lance with a slightly higher pressure, safe to use on motorcycle bearing and suspension parts.
ADJUSTABLE CLEANING LANCE: An adjustable cleaning lance allowing you to adjust the pressure for heavier grime on your tyres and anything else that you care about that needs cleaning with a bit more pressure
DESCRIPTION
Are you tired of getting covered in grease, oil and road grime when you’re tuning up your bike? We are too. That’s why we created the world’s finest workshop apron.
The Muc-Off Workshop Apron has straps and buttons for adjustable size and length that keep you from getting tangled and perfectly sized pockets that make sure your hands are always free when you need them.
This Workshop Apron is a vital piece of kit for any lover of bikes. Now you can keep your tools, phone and gummy bears at close reach while protecting your clothes from the evils of bike grime! Not only is the Muc-Off Workshop Apron incredibly practical, but its rubberised logos and black design make sure you look good out there.
This apron isn’t just a must-have tool for the workshop; it’s pretty handy at BBQ's too!
FEATURES
- Protects clothes from grease and grime
- Buttons for adjustable length
- Straps for adjustable size
- Rubberised logos and black design
- Keep tools etc on hand with its convenient pockets
DESCRIPTION
Our Dry Chain Lube has been formulated to hold up to the extreme pressures that are applied to a modern drive chain.
Muc-Off Dry Chain Lube is formulated to hold up to the extreme pressures that are applied to modern drive chains. This highly versatile, dry weather chain lube has superior penetrative qualities that ensure every part of the chain link is completely lubricated. Our advanced ‘Dry Formula’ creates a clean, durable and protective chain wax layer that inhibits rust development and chain link corrosion. The formula creates exceptionally low surface friction to provide incredible drive chain efficiency without attracting contaminants. It’s clean, and it’s easy to use!
FEATURES
- Additives reduce friction and energy consumption
- Waxed based formula reduces metal to metal contact
- Excels in dry, dusty conditions
- Protects against rust development and corrosion
- Prevents chain wear
- Does not attract contaminants
- Ideal for MTB, Road and Cyclocross
- Can be applied to chain, cleats, shifters and derailleurs
*Only contents are biodegradable.
DESCRIPTION
This one’s for the speed freaks. Say hello to the world’s fastest race lube – Ludicrous AF. It's pure drivetrain dynamite!
This badass bottle of liquid magic has been in the works with our lab boffins for over three years. The result is a category-leading piece of exceptional science that marries unrivalled speed with sustainability, through cutting-edge research and innovation.
It’s the F1 car of bike lubes – stripped back to the bare essentials. That means no colouring, no fragrance, no additional corrosion inhibitor, just a unique blend of renewable and readily biodegradable ingredients designed to minimise chain friction and wear, whilst maximising performance in all conditions. This all means one thing – RAW SPEED!
With an ultra-viscous formula that makes its way into every contact point of your chain, smoothness and silence is guaranteed. So when you’re chasing the competition you can shift with the confidence that you’re using the best around.
Developed in secret over a number of years by Muc-Off’s in-house R&D Team, tested with INEOS Grenadiers, EF Education-NIPPO, BMC Pro Triathlon, Canyon//SRAM, plus other professional teams and athletes, Ludicrous AF takes drivetrain performance to a whole new level. Perfected throughout the 2020 Grand Tour season, with multiple podiums and overall wins at the last two Giro d’Italias, you simply won’t find a faster lube!
Calling all hardcore roadies, track racers & triathletes, the game just changed!
HOW TO
Directions for use:
Fully degrease drivetrain thoroughly before lube application.
Ensure the drivetrain area is dry. For optimum results, we recommend removing your chain before or after cleaning, and drying it thoroughly in an oven, to ensure all moisture is removed before applying Ludicrous AF.
Shake the bottle vigorously and apply a moderate amount of Ludicrous AF to the inside of each chain link, whilst spinning pedals in a reverse motion. For optimum results, we recommend using an Ultrasonic Tank, to ensure total critical surface coverage.
Apply the night before your race. For optimum results, we recommend allowing as much time as possible for Ludicrous AF to work its magic.
Wipe off excess lube carefully.
How to ensure your chain is in its optimal performance window
Ludicrous AF will work straight out of the bottle, but for maximum race performance, the friction modifier should be activated first. The activation occurs during articulation of the chain by attracting the additive in the lubricant and adsorption occurs. With a new chain or a chain treated with AF for the first time, a minimum of 2-3hrs riding followed by a clean and retreat will give optimum results. Then, pre-race, 30 mins of riding will get you to the absolute performance sweet spot. As the additives start adsorbing on either side of the contact, the formation of a low friction plane is initiated, and friction starts to decrease. Multiple cleans and retreats will continue to improve the performance as the chain reaches an optimised state.
Additional note: To avoid corrosion, clean and re-lube immediately after riding in wet conditions to maintain peak performance. Keep out of the reach of children.
*Only contents are readily biodegradable
The Muc-Off Saddle Pack is your ultimate riding companion, for the trail or the road.
Crafted from high-quality, weather-resistant materials, the pack is built to endure the most demanding conditions, keeping your essentials safe whatever the ride throws at you.
The hook and loop straps make it super easy to secure it to your saddle rails, and there’s more than enough room inside to stash all those riding essentials: An inner tube, Muc-Off repair kit, multi-tool, Rim Stix and more. We’ve even built in a handy slot to stow your cash and cards, so you can explore with the peace of mind, that you’re covered in any situation.
FEATURES
- Premium grade water repellent 600D TPU
- Durable, moulded and heat-sealed construction
- Water resistant zip
- Hypalon Hook and Loop adjustable strap
- Designed to fit inner tube, Muc-Off mini pump or CO2 inflator, Rim Stix, multi-tool, Repair Kit, and other accessories
- Easy to fit and remove, no tools required
- Inner mesh net and elasticated straps
- Reflective printed graphics
- Lightweight
PRODUCT SPECIFICATIONS
- Capacity – 0.7L
- Weight: 95g
- Dimensions: 160 x 110 x 70mm
- Colour: Black
- Materials: 50% POLYURETHANE (TPU), 50% POLYETHYLENE (CPSE)
DESCRIPTION
Our Indoor Training Kit has got bigger and better! It’s packed with everything you need to keep clocking up indoor miles during winter or rainy days.
Use our Antibacterial Equipment Cleaner to make your indoor sufferfest sessions germ-free, and our Luxury Chamois Cream to keep that damn chafing away! While Sweat Protect will keep your bike in top-notch condition by stopping rust and corrosion, no matter how much sweat you throw at it.
Even when you’re riding at home, a well-lubed drivetrain is essential for smooth shifting and lasting performance. Our epic C3 Ceramic Dry Lube will do the trick, and marginal gains even make you faster in the virtual world!
To round it all off, we’re throwing in a Microfibre Cloth for polishing your steed, and a Muc-Off Tote Bag to keep everything together, plus it looks rad too!
FEATURES
SWEAT PROTECT - 300ML
- The end of corrosion caused by sweat on your training equipment!
- For use all over indoor trainers and all gym equipment
- Prevents and stops corrosion on metal surfaces
- Integral tracer dye – aids accurate application to ensure total protection
ANTIBACTERIAL EQUIPMENT CLEANER - 500ML
- Kills 99.99% of germs
- Effective against enveloped viruses • Lasts longer than alcohol-based sanitisers
LUXURY CHAMOIS CREAM - 100ML
- Enriched with natural Aloe Vera, Witch Hazel, Shea Butter and Sunflower Oil
- Contains provitamins
- Has a mild cooling function
C3 DRY WEATHER CERAMIC LUBE - 50ML
- Provides the ultimate drivetrain performance
- Ceramic coating for increased drive chain protection
- Synthetic polymers for long-distance performance
- Incredible durability
- Pipette system for easy application
- Includes UV torch to check for 100% coverage
PREMIUM MICROFIBRE CLOTH
- Effortless cleaning, drying and polishing power at your fingertips
- Eliminates smears and blemishes with ‘split-fibre’ technology
MUC-OFF TOTE BAG
- Looks rad
- Keeps all your essentials in one handy place
WHAT'S INCLUDED
- Sweat Protect 300ml
- Antibacterial Equipment Cleaner 500ml
- Luxury Chamois Cream 100ml
- C3 Dry Lube - 50ml
- 1x Microfibre Cloth
DESCRIPTION
Keep your floor as dialled in as your ride with the Muc-Off Ridiculously Absorbent Floor Mat.
Reppin’ a super absorbent top layer made from high-tech materials, this bad boy drinks up moisture like the Titanic. Plus, the grippy, textured rubber base holds on tight to smooth surfaces, kicking slippage to the curb and trapping contaminants where they belong.
Whether you're in the shop, workshop, home, or garage, keep your setup pristine with the ultimate floor shield.
FEATURES
- Durable pile absorbs moisture
- Protects your floor
- Heavy duty, rubber non-slip base
- Non-curl edges keep the mat flat
- Can absorb up to approximately 2L of liquid
- Rolls up for easy storage and transportation
-
Mat can be hand washed or jet washed to clean
SPECIFICATIONS
- Size: 91 x 61cm
- Pile material: Nylon
- Pile type: Cut pile
- Pile height: 3.5mm
- Pile weight: 450 g/m2
- Back material: Nitrile rubber
- Rubber Boarder: 2cm
Take your bike care to the next level with the Muc-Off Microfibre Detailing Brush Set, the ultimate trio for precision cleaning.
Designed with comfort and performance in mind, each brush features an ergonomic foam handle for effortless control, even during the toughest cleaning jobs. With three sizes to choose from, you’ll easily tackle every nook, cranny, and hard-to-reach spot.
The bendable core offers unmatched flexibility, while ultra-soft microfibres work tirelessly to lift dirt and grime without leaving a scratch. Engineered to be gentle on delicate surfaces like painted finishes and wheels, these brushes ensure your ride stays in pristine condition. The microfibres lock in dirt particles, keeping them off the surface during cleaning, and rinse away effortlessly to prevent damage.
When you're done, simply hang them up using the convenient hanging loops for quick and easy storage. Whether you’re detailing your bike, motorbike, or anything else in need of a spotless clean, the Muc-Off Microfibre Brush Set is your trusted partner for a flawless, scratch-free clean every time.
- Soft, fluffy microfibre cleaning heads
- Ultra-soft microfibres lift dirt and grime without leaving a scratch
- Range of diameters suitable for different cleaning jobs
- Bendable core so you can get to hard-to-reach areas
- Ergonomic EVA foam handle
- Hanging loops
- Safe across different wheel and painted finishes
Rinse out after every use, squeeze and shake out excess water then leave to air dry so they’re clean and ready to use the next time you need them.
SPECIFICATIONS
- Large: Total Length: 41cm – Microfibre: 41cm (L) x 7cm (Ø) – Handle: 13cm
- Medium: Total Length: 41cm – Microfibre: 20cm (L) x 4cm (Ø) – Handle: 13cm
- Small: Total Length: 38cm – Microfibre: 16.6cm (L) x 5cm (Ø) – Handle: 13cm
Material:
Handle: 100% EVA - Core: 100% Polypropylene – Microfibre Brush: 100% Polyester
Ride uninterrupted with our Precision Tubeless Repair Capsule. It’s lightweight, easy-to-use, and the ultimate backup for those gnarly punctures that just won’t seal.
The tough and durable CNC machined 6061 aluminium body doubles as a stash for your worms and the tool’s handle is silicone wrapped for an easy grip in all conditions.
It’s both a puncture plug and a reamer tool thanks to the hardcore 304 Stainless steel 2 in 1 integral tool, and comes supplied with 5x thin, 5x medium, and 5x thick worms. It’s compatible with all tubeless road, gravel, and MTB tyres.
FEATURES
- Durable CNC Machined 6061 Aluminium construction
- Premium anodised finish
- Stainless Steel 2-in-1 puncture plug/reamer tool
- Integrated Presta valve core remover slot
- Compact capsule body stashes tyre worms
- Silicone wrap for grip
- Knurled screw in design with weatherproof O-ring
- Compatible with Road, Gravel, and MTBs with tubeless tyre setups
WHAT'S INCLUDED
- Puncture Plug 2in1 tool and capsule
- Supplied with 15 plugs:5 thin, 5 medium, 5 thick (Refill packs available separately).
- Cordura® stash pouch
HOW TO
- Identify the source of the puncture and remove the debris or puncture source.
- If the puncture requires the medium or larger worms then ream the hole several times with the knurled area of the tool, make sure you use a 45-degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!
- Now Grab a tyre worm (you may need to use the tool to help slide out the worms). The largest size is for MTB tyres the medium for gravel tyres and the small for road tyres, but you can select the best one for your sized hole. Now pinch one end of the worm hard between your fingers to flatten it out. (If using the thin worm thread through the tip at the end of the tool, not the main larger slot)
- Thread through gap at the end of the tool so the worm is now sitting centrally on the tool.
- Locate the puncture hole then insert the tool through the hole (at a 45 degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!) until the worm is around halfway through the tyre. Ensure the ends of the worm remain on the outside of the tire.
- Turning the tool slowly clockwise a few revolutions to twist the worm inside the tire and slowly pull up to remove – leaving the worm in your tyre and the hole plugged.
- Re-inflate tyre to your desired pressure and you’re ready to roll!(We recommend a max of 80 PSI on a road bike!)
- Once you are home we’d recommend trimming the worm ends down with a knife so there is a minimum of 3-5mm still sticking out the tyre. (Be careful when trimming).
TOP TIP! Simply trim down your different sized worms into singles or doubles and place them inside the capsule so you have multiple options for different sized punctures!
WARNING: Keep out of reach of children. The tool has SHARP EDGES so use with caution. For Road tyres we strongly recommend replacing your plugged tyre once it’s safe to do so, particularly if you want to use with high psi!
(We recommend a max of 80 PSI on a road bike!)
DESCRIPTION
B.A.M! quickly inflates and repairs punctures at the same time by injecting latex foam and air into a tyre or tube.
Now featuring a flexible hose for Presta and Schrader compatibility, B.A.M! is the perfect emergency backup that can be strapped to a bike frame using the B.A.M! Utility Belt (sold separately) or carried in a Ride Pack or Saddle Pack.
Compatible with Road, CX/Gravel and MTB wheels, as well as most tubeless sealants, B.A.M! Will inflate a 29” MTB tyre in under a minute, sealing 3-4mm holes with ease.
F**K Punctures - Ride uninterrupted with B.A.M!
FEATURES
- Pink Synthetic Latex foam sealant and inflation
- Flexible Hose fits Presta and Schrader valves
- Compatible with Road, CX/Gravel and MTB wheels
- Inflates a 29" MTB tyre & 700c Road tyre in under a minute
- Seals holes up to 3-4mm
- Does not contain ammonia
- Compatible with most tubeless sealants
HOW TO
- Find the cause of the flat tyre and remove any debris.
- Move the valve to the 12 o'clock position on the wheel and open the valve core (if you have one) and check that the valve is clear.
- Shake the can.
- Screw the hose on to the valve stem.
- Hold down the button until the tyre is sufficiently inflated.
- Remove the hose from the valve and tighten the valve core.
- Give the wheel a quick spin to distribute the latex round the tyre.
- Get back to the action!
Introducing the ultimate Valve Core Remover Tool: Precision crafted for effortless core removal.
Struggling with stubborn valve cores not your jam? Maintaining your tyres, tubes, or tubeless setup should be hassle-free, so we created the Valve Core Remover Tool. Crafted with precision from CNC machined 6061 aluminium, this tool is designed to make removing your valve cores quick and easy. Engineered to tackle both Presta and Schrader valves, say hello to your toolkit'slatest addition.
FEATURES
- Compatible with both Presta and Schrader valves
- Durable CNC construction
- Aircraft grade 6061 aluminium
- Workshop or keyring slot
- Compact design
- Knurled grip
WHAT'S INCLUDED
- Weight: 13g
- Dimensions: 63mm x 12mm
Introducing the It Blows! Precision Air Blaster – the compact, rechargeable air blaster that’s here to make drying your bike a breeze.
This tornado in your hand cranks out a precision flow of high-powered air to blast water out of every nook and cranny of your ride after a clean, firing air into all those pesky, hard-to-reach water-pooling spots helping to prevent rust and corrosion.
Built from hardcore aircraft-grade aluminium, this pocket rocket is CNC machined so it is tough as nails and ready to rock wherever you take it.
Unleash the power of touchless, hardcore drying!
Tip! Use alongside our ceramic coating for insane water beading and post-clean drying!
FEATURES
- 4 Speed/power settings for optional airflow.
- High speed 80W motor delivers touchless drying, reducing the risk of micro-scratching paintwork and corrosion.
- Durable CNC Machined Aluminium construction with anodised finish
- Supplied with additional silicone nose piece for targeted airflow.
- Compact, handheld design with a soft touch on/off button
- USB-C rechargeable battery
- Battery indicator light
- Can be used on bikes, motorcycles, cars and other powersports toys.
WHAT'S INCLUDED
- It Blows! Precision Air Blaster
- Silicone Nozzle
- USB-C Charging cable
- Manual
SPECIFICATIONS
- Dimensions: 68 x 36 x 124mm
- Weight: 295g ± 5g
- Motor: 80w
- Fan speed (RPM): Turbo: 100,000, High: 80,000, Mid: 60,000, Low: 40,000
- Battery Capacity: 1100MAH
- Rated Voltage: 12V
- Charging Voltage: 5V/2A
- Charging Port: USB-C
- Charging Time: 3 hours
- Run Time: Turbo: 10 mins, High: 15 mins, Mid: 45 mins, Low: 1.5h
- Noise level: 56 – 81 dB
- Operating temperature range: 0°C~+40°C
Level up with the next gen of electric inflation tech. Gear up, charge up and inflate fast with this pocket-sized game-changer.
Featuring an LED display which shows real-time air pressure and battery level and inflates rapidly up to 120psi!
Small in size, big on innovation, this mini inflator is designed for riders who prefer riding to pumping. With its sleek full aluminium body and innovative inflator head, this tiny titan packs a punch, delivering up to 120psi of lightning-fast inflation with electric effortlessness.
Don't let its size fool you – powered by cutting-edge brushless motor technology, it's the ultimate sidekick for when you want to re-inflate fast, with zero effort. It’s fully USB-C rechargeable so is re-juiced in a flash (30 minutes, to be exact), and you can switch between Presta and Schrader valves, so it works on most bikes.
Air up and get back to the action...fast.
FEATURES
- Aircraft grade aluminium construction
- Up to 120psi
- Knurled/Anodised head with 2in1 valve pin
- Compatible with both Presta, Schrader and Big Bore valves
- Real-time air pressure and battery level display
- Inflates up to 4 tyres on one charge
- Universal USB-C Connection
- Rechargeable lithium-ion battery
- Supplied with Air Hose for use with plastic valves/TPU tubes, inflatable toy nozzle and ball inflation needle.
-
Protective silicone case
SPECIFICATIONS
- Size: 64.5 x 63 x 28mm
- Weight: 122g without case (142g with case)
- Battery: Lithium-ion 450mAh 7.4V
- Rated Power: 40W
- Working current: 2.5 ~ 7.5 A
- Charging Mode: USB-C (Cable included)
- USB output: 5V 1.5A
- Charging time: 30 minutes fast charge
Featuring a cutting-edge, integrated ball valve system, the valve ensures lightning-fast air flow, turbocharging the sealant filling process. Say goodbye to the hassle of traditional tubeless valves that clog up and require the valve core to be removed to fill sealant and achieve sufficient air flow during tubeless set up.
Our Big Bore Hybrid offers up to 254% higher air flow than traditional Presta valves thanks to the straight through bore design.
With our ball valve construction and integrated lever, you can quickly open and close the valve for effortless airflow control, and even fine tune your pressure whilst you're out riding.
Crafted from 7075 aircraft grade CNC machined aluminium construction with a stainless steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions.
WHAT'S INCLUDED
-
Big Bore Valve: Available in 6 colours and 4 different sizes (60mm available in Black only).
-
Hex Slot Key: 4mm machined hex key slot for easy installation/removal
-
Rubber Bases & O-Rings: Supplied with various rubber bases and O-Rings to optimise fit and seal with multiple rim type
-
Bespoke Spanner: Specifically designed to tighten the big bore body during installation and removal
- Sold Separately: Sealant dipstick also available separately
HOW TO
- Remove Ball Valve: First, remove the ball valve body, cap, locking ring & O-ring from the valve stem.
- Choose Base: Choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Slide this down to the bottom of the valve stem. (If your rim has a larger valve hole and the smaller circular fitment is too loose, use the larger circular fitment to plug the hole).
- Push Valve Stem Into Hole: Now push the valve stem into the hole in the rim and push it right the way through. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.
Looking for an all-weather Essentials Case that's got your back no matter the conditions? One that can stash your phone, essential tools, and puncture repair kits but also fits snugly in your back or side pocket?
Introducing our Waterproof Essentials Case, the ultimate storage solution for cyclists of all terrains, from rugged trails to road. Crafted from durable, waterproof TPU fabric, this case provides the necessary protection for your ride essentials. Its robust rubber-encased rope zip pull ensures quick and hassle-free access while on the move.
Equipped with Molle straps on the back, this case easily attaches to Molle accessories or bags for added convenience. Inside, a ripstop divider keeps your cards separate from your smartphone, or your inner tube neatly apart from multi-tools, CO2 cylinders, and tyre levers. Additionally, there's an internal zipped pocket for smaller valuables like keys and coins, ensuring everything stays secure and organized.
- Weight: 61g
- Dimensions: 175 x 90 x 20 mm
- Material composition: 55% TPU, 45% POLYESTER
FEATURES
- Premium grade waterproof 600D TPU
- Durable, moulded and heat-sealed construction keeps water out
- Waterproof zip with puller*
- Inner ripstop divider
- Zipped internal pocket
- Reflective printed graphics
- Lightweight
** Ensure the zipper puller is securely closed into the zip stop to maintain waterproofing
DESCRIPTION
Copper Compound paste make stuck threaded screw connections and tight metal joints are a thing of the past. Simply apply it to threaded, plug and screw connections that are especially exposed to corrosion. The copper-based assembly paste reliably prevents contact corrosion and resulting damages on threaded connections and metal parts.
Apart from protecting bottom bracket, headset and thru axle threads, the assembly paste also keeps sensitive components running smoothly. It helps reduce friction and thus prevents creaking and cracking noises on seatpost and cranks.
FEATURES
- Copper-based assembly paste.
- For metal connections of steel, titanium, aluminium.
- Protects from corrosion, reduces friction.
- Saltwater resistant.
- Does not attack metal, carbon, plastic and rubber.
- WARNING: Causes serious eye irritation.
- Keep out of reach of children.
- Store in a cool well ventilated area.
- We recommend wearing gloves, wash immediately with plenty of soap and water if contact is made with skin.
A spare back of x10 puncture plugs to help fix punctures when you’re out on a ride. Compatible with all tubeless road, MTB and gravel tyres. Refill packs with 10 repair plugs (5x thin and 5x thick).