Buzzrack

FEAUTRES

The BuzzRack Beetle is a robust rack that will carry up to three bikes and fits many cars. It attaches to the tailgate using six straps and foam pads on the rack protect your bumper / tailgate.

Other great features of this easy-to-use rack include:

• The rack is adjusted with an easy-to-use cam lever mechanism with a quick release handle
• The rack only weighs 5.4kgs
• Your bikes are help securely in place in anti-sway rubber cradles that keep your bikes separate
• The cradles are lined with a soft rubber to protect your bike’s paintwork
• Supplied fully assembled – ready to mount to your car
• Folds flat for easy storage
• The outer distance between the support arms is 40.6cm, a distance which will suit the majority of modern frames; we supply a telescopic cross bar for use with non standard frames – see ‘frame adapter’ below.

The narrow arm design means most bike frames will fit securely onto this rack. This carrier has a distance of 40cm between the bike support arms. An ‘artificial cross bar’ will be required for some ladies and full-suspension bikes (listed below).

The majority of cars require a lighting board (shown as an option below) and number plate when using this rack.

Please note that you cannot use rear fixing carriers on cars with rear plastic spoilers, or on vehicles where modifications to the roof or tailgate would have an effect on the fitting of the carrier. Find a different solution – either roof mounting and/or tow bar mounting. Important fitting information: The bikes will obscure the lights on the back of this vehicle so you will also need a lighting board (listed below) when using a boot mounting rack on this car. You will need to have a socket fitted for the lighting board to plug into. Depending on the position of your number plate you may also need a replacement number plate if this is also obscured.

SPECIFICATIONS

FEAUTRES

The BuzzRack Beetle is a robust rack that will carry up to three bikes and fits many cars. It attaches to the tailgate using six straps and foam pads on the rack protect your bumper / tailgate.

Other great features of this easy-to-use rack include:

• The frame has a shock absorber system to reduce vibration

• The wheel supports adjust to fit most sizes of bikes

• The soft, quick-release wheel straps fit most rims and tyre sizes

• The lockable bike arms are lined with a soft rubber to protect your bike’s paintwork and keep the bike locked to the rack.
• The wheel support frame folds up when not in use
  

Please note that you cannot use rear fixing carriers on cars with rear spoilers.

Important fitting information: You must either disable or not use the rear windscreen wiper when this bike carrier is mounted.

Important fitting information: The bikes will obscure the lights on the back of this vehicle so you might also need a lighting board  when using a boot mounting rack on this car. You will need to have a socket fitted for the lighting board to plug into. Depending on the position of your number plate you may also need a replacement number plate if this is also obscured.

SPECIFICATIONS

FEAUTRES

The geometry of the PILOT S frame allows a quick and easy installation on most sedans. The low-profile frame makes it easier to load the bikes. Solidly built of steel and high impact resistant plastic materials. The geometry keeps the bikes away from the car.

Other great features of this easy-to-use rack include:

• The frame has a shock absorber system to reduce vibration
  

• The wheel supports adjust to fit most sizes of bikes

• The soft, quick-release wheel straps fit most rims and tyre sizes
• The lockable bike arms are lined with a soft rubber to protect your bike’s paintwork and keep the bike locked to the rack.

• The wheel support frame folds up when not in use
  

Please note that you cannot use rear fixing carriers on cars with rear spoilers.

Important fitting information: You must either disable or not use the rear windscreen wiper when this bike carrier is mounted.

Important fitting information: The bikes will obscure the lights on the back of this vehicle so you might also need a lighting board  when using a boot mounting rack on this car. You will need to have a socket fitted for the lighting board to plug into. Depending on the position of your number plate you may also need a replacement number plate if this is also obscured.

SPECIFICATIONS

FEAUTRES

SCORPION PRO 3 is a fully-accessorized bike carrier specially designed for larger or heavier bikes, including e-bikes. With a frame shape that makes fitting step-through bikes a breeze, it can hold almost any model you currently have or may acquire in the future.

With its solid build the carrier is no lightweight, yet it remains easy to handle thanks to its compact size when folded. You’ll be able to stay close to the tow ball to put it in place, thus preserving your back, and you can wheel it about for easy storage.  The E-Scorpion also holds its weight on the ball while you let go to tighten, lock and unfold. You won’t even have to lift your bike: just use the ramp to put it in place and then place the ramp back into the carrier. Once securely fastened, you’re ready to go, the added anti-sway device will keep everything firmly in place during transport. And we’ve also included an anti-theft cable so you can travel worry-free.

It’s particularly easy to tilt, with the tilt control just above the number plate. The lights have 5 functions – including a reversing light and a fog light if you have a 13-pin socket.

SPECIFICATIONS