Sort by:
Includes T10, T15, T20, T25, T27, T30, T40, T45, and T50 sizes.
Constructed from high-strength S2 steel for extreme toughness.
| Tools | T10 / T15 / T20 / T25 / T27 / T30 / T40 / T45 / T50 |
| Material | SNCM-V steel |
| Size | 18.4 x 10.7 x 1.8 cm |
| Weight | 345 g |
FEAUTRES
The geometry of the PILOT S frame allows a quick and easy installation on most sedans. The low-profile frame makes it easier to load the bikes. Solidly built of steel and high impact resistant plastic materials. The geometry keeps the bikes away from the car.
Other great features of this easy-to-use rack include:
- The frame has a shock absorber system to reduce vibration
- The wheel supports adjust to fit most sizes of bikes
- The soft, quick-release wheel straps fit most rims and tyre sizes
- The lockable bike arms are lined with a soft rubber to protect your bike’s paintwork and keep the bike locked to the rack.
- The wheel support frame folds up when not in use
Please note that you cannot use rear fixing carriers on cars with rear spoilers.
Important fitting information: You must either disable or not use the rear windscreen wiper when this bike carrier is mounted.
Important fitting information: The bikes will obscure the lights on the back of this vehicle so you might also need a lighting board when using a boot mounting rack on this car. You will need to have a socket fitted for the lighting board to plug into. Depending on the position of your number plate you may also need a replacement number plate if this is also obscured.
SPECIFICATIONS
- Carries: 2 bikes
- Weight: 9.2kg
- Max load: 30kg
- Bike weight: 15kg max
- Best for sedan
FEAUTRES
The BuzzRack Beetle is a robust rack that will carry up to three bikes and fits many cars. It attaches to the tailgate using six straps and foam pads on the rack protect your bumper / tailgate.
Other great features of this easy-to-use rack include:
- The frame has a shock absorber system to reduce vibration
- The wheel supports adjust to fit most sizes of bikes
- The soft, quick-release wheel straps fit most rims and tyre sizes
- The lockable bike arms are lined with a soft rubber to protect your bike’s paintwork and keep the bike locked to the rack.
- The wheel support frame folds up when not in use
Please note that you cannot use rear fixing carriers on cars with rear spoilers.
Important fitting information: You must either disable or not use the rear windscreen wiper when this bike carrier is mounted.
Important fitting information: The bikes will obscure the lights on the back of this vehicle so you might also need a lighting board when using a boot mounting rack on this car. You will need to have a socket fitted for the lighting board to plug into. Depending on the position of your number plate you may also need a replacement number plate if this is also obscured.
SPECIFICATIONS
- Carries: 2 bikes
- Weight: 9.2kg
- Max load: 30kg
- Bike weight: 15kg max
- Best for hatchbacks
FEAUTRES
The BuzzRack Beetle is a robust rack that will carry up to three bikes and fits many cars. It attaches to the tailgate using six straps and foam pads on the rack protect your bumper / tailgate.
Other great features of this easy-to-use rack include:
- The rack is adjusted with an easy-to-use cam lever mechanism with a quick release handle
- The rack only weighs 5.4kgs
- Your bikes are help securely in place in anti-sway rubber cradles that keep your bikes separate
- The cradles are lined with a soft rubber to protect your bike’s paintwork
- Supplied fully assembled – ready to mount to your car
- Folds flat for easy storage
- The outer distance between the support arms is 40.6cm, a distance which will suit the majority of modern frames; we supply a telescopic cross bar for use with non standard frames – see ‘frame adapter’ below.
The narrow arm design means most bike frames will fit securely onto this rack. This carrier has a distance of 40cm between the bike support arms. An ‘artificial cross bar’ will be required for some ladies and full-suspension bikes (listed below).
The majority of cars require a lighting board (shown as an option below) and number plate when using this rack.
Please note that you cannot use rear fixing carriers on cars with rear plastic spoilers, or on vehicles where modifications to the roof or tailgate would have an effect on the fitting of the carrier. Find a different solution – either roof mounting and/or tow bar mounting. Important fitting information: The bikes will obscure the lights on the back of this vehicle so you will also need a lighting board (listed below) when using a boot mounting rack on this car. You will need to have a socket fitted for the lighting board to plug into. Depending on the position of your number plate you may also need a replacement number plate if this is also obscured.
SPECIFICATIONS
- Carries: 3 bikes
- Weight: 4.6kg
- Max load: 45kg
- Bike weight: 15kg max
Description:
NYLON 1680D WITH PVC COATED BIKE TRAVEL BAG: This XXF N2020 Bike travel bag is made of 1680D Nylon high quality material that makes this cover stronger and more durable. The whole bag is wrapped by high density webbing to enhance the bag strength, it is enough to cope with the carrying burden under a severe environment for many times and long times.
FULL PROTECTION WITH 360° ROTATING WHEEL: It includes auto-inflatable pads on both sides of the bag that will protect your bike during transit perfectly and also, It Includes extra pads to protect the bike and self-inflated air bag to protect the wheels. There’s a separate organized space for each wheel, compartments for other accessories, and a storage for your tools. The bottom roller wheel is 360 degrees, and the universal wheel is unobstructed no matter whether it is flat or depressed. The size of the wheels is 2.5 inches.
WATERPROOF BAG WITH EXTRA LARGE CAPACITY- This rainproof durable cycling tarp will cover the whole bike body including the wheels to the ground, efficiently protecting your bike against the elements: sun, rain, wind, snow, ice, dust, dirt. You can take two extra wheels inside the bag. Extra-large zippered compartment provides plenty of organization, very convenient for loading and taking out the bike and effectively protects travel gear or personal belongings from water dirt and dust.
COMPATIBILITY: It’s 6061 alloy holder is adjustable to fit different sizes of bikes. It fits for Front width 58/after width 24cm\Bottom width 28cm/bottom length:120cm Height: 90cm. Measure your bike dimensions as on the product image to make sure it will perfectly fit inside the bag. The seat height might need to be adjusted depending on your bike size and geometry.
EASY FOR CARRYING OR STORING: This rolling travel luggage is easy for you to carry. The Four-wheel design is perfect for rolling your bike storage case with ease. You can use any transport like Bus, Train, Plane, Ship. The Velcro loops are available in the bag to secure the cage. It’s recommended to carry wheels inside the bag for greater safety. It is so relaxed and time-saving!
SPACE SAVING WHEN NOT USING: This bike travel bag is coming with a small storage bag. When it is not in use, you can put the bike travel bag in the small storage bag. It will not take too much space to carry the bike travel bag when you go on a bike trip or camp with your foldable bikes. So, feel free to bring your bike anywhere and anytime with this bike travel bag.
Specification:
- Model Name: N2020
- Product Name: Bike Transport Bag with Frame and Pads
- Color: Black-Blue
- Material: Nylon 1680D +PVC coated, 420D Lining
- Travel bag Package measurement: 112*50*40cm
- Feature: Waterproof
Description:
- Fits All 26". 27.5". 29". 700C and integrated seatpost bikes and TT bikes
- Fits All 26". 27.5". 29" Dual dual suspension bikes
- The case is formed by EVA material under 200degree heat, the surface thickness is 1CM, and the hardness (Hs) is up to 80. It is high impact strength and good tear & abrasion resistance.
- The thick sponge layer will protect the wheels and frame for impacting each other, various stout buckles and straps to protect the bicycle parts for extra security, never worry they will fall out during transit.
- The Clam Shell design is enables case to be fully opened for ease of stowing the bike.
- Front 2 360degreed spinning wheels & Rear super rubber wheels, which it can be horizontal pushing; it is more smoothly and relaxed for carrying.
- Strong. Integrated strength YKK zips and backed up by quick release buckles.
DESCRIPTION
Introducing the World's first pressure washer designed and built purely for cleaning both bicycles and motorcycles.
The Muc-Off Pressure Washer Bicycle Bundle includes all you need to get your bike back to that factory fresh look while also looking out for those delicate bearings, surfaces and suspension parts. Our pressure washer bundle features three lances to cater for specific cleaning needs, as well as a Snow Foam Lance to transform your bottle of Nano Tech Bike Cleaner into the ultimate dirt destroying snow foam.
A waterproof Dry Bag is also included. All you need is a power source and water supply and you'll be able to give your pride and joy the ultimate deep clean it deserves!
PRODUCT INFORMATION
THIS UNIT IS INTENDED FOR USE WITH COLD WATER ONLY! DO NOT USE HOT WATER IN THIS PRESSURE WASHER.
- Operate the pressure washer at no more than the fluid pressure rated for the pressure washer.
Never run the pressure washer without a water supply. Running the unit without a water supply will cause irreparable damage to the unit. - Make sure that the water supply you use for the pressure washer is not dirty, sandy, and does not hold any corrosive chemical products. Using a dirty water supply will compromise the long life of the pressure washer.
- NEVER move the unit by pulling on the hose. Use the handle provided on the top of the unit.
IMPORTANT SAFETY TIPS:
- Never point the pressure nozzle at people or animals.
- Never drink alcohol or use drugs while operating the pressure washer.
- Never operate the pressure washer while standing in water.
- Never touch the electrical plug with wet hands.
- Never let electrical connections rest in water.
- Never operate pressure washer without the water turned on.
- Never use hot water with this pressure washer.
IMPORTANT SAFETY PRECAUTIONS
WARNING: When using this product, basic precautions should always be followed, including the following:
- Read all instructions before using the product. Please keep all safety instructions.
- Do not operate the pressure washer when fatigued or under the influence of alcohol or drugs.
- Risk of injection or injury – do not direct the water stream at people or animals.
- Do not allow children to operate the pressure washer at any time.
- To reduce the risk of injury, please take extra care when the pressure washer is used near children.
- Know how to stop the unit and reduce pressure immediately. Be completely familiar with the controls.
- Stay alert – always be aware of where you are directing the spray.
- Keep cleaning area clear of people.
- Keep a good footing and balance at all times – do not overreach or stand on an unstable surface.
- The work area should have adequate drainage to reduce the possibility of a fall due to slippery surfaces.
- Follow the maintenance instructions specified in this manual.
- To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands.
FEATURES
PRESSURE WASHER
- Motor Power: 1200W
- Volt/Freq: 220-240V~50/60Hz
- Motor Type: Carbon brush motor
- Rated Pressure: 70 bar
- Permissible Pressure: 100 bar
- Max. Inlet Water Pressure: 1.2 MPa
- Rated Flow: 5.5L/min
- Max. Flow: 6.5L/min
- Max. Water Temperature: 50°C
- Water Protection Class: IPX5
- N.W. / G/W.: 5.5/6.2 kgs
- Carton Size: 290 x 265 x 413mm
- Power Lead Length: 5M
DRY BAG
- 30L capacity
- Waterproof PVC construction
- Heavy duty grab handles
- Front storage pocket
- Rear and side accessory nets
SNOW FOAM LANCE
- Custom lance fits directly onto the top of your bottle of Muc-Off Nano Tech Bike Cleaner, Muc-Off Nano Gel Concentrate or 1L Snow Foam meaning no additional bottle is required to mix or dilute.
- Top Dial Adjusts level of foam concentration but adjusting the water flow rate and mixing with the cleaner in your bottle.
- Produces high quality, thick snow foam.
- Soft touch coated.
WHAT'S INCLUDED
PRESSURE WASHER: Specifically designed to be safe for use on your bike, so you can get all the benefits of a thorough clean with far less effort!
PRESSURE WASHER DRY BAG: The custom waterproof dry bag carry case is designed to easily store the Muc-Off Pressure Washer and keep available peripherals within easy reach and safe from tripping over in your garage!
SNOW FOAM LANCE: To go alongside the pressure washer, we’ve designed a specific low-pressure snow foam lance that won’t damage any delicate parts but transforms your bottle of Muc-Off Nano Tech Bike Cleaner into thick snow foam for the ultimate and efficient deep clean.
BICYCLE CLEANING LANCE: A bicycle specific cleaning lance that's powerful enough to blast dirt and grime from your bike, while still being safe to use on bearings and suspension parts.
MOTORCYCLE CLEANING LANCE: A motorcycle specific cleaning lance with a slightly higher pressure, safe to use on motorcycle bearing and suspension parts.
ADJUSTABLE CLEANING LANCE: An adjustable cleaning lance allowing you to adjust the pressure for heavier grime on your tyres and anything else that you care about that needs cleaning with a bit more pressure
- Zero air loss Schrader valve adapter
- Perfect for air spring forks, shocks, and hard-to-reach valve stems
- Ensures accurate pressure even during removal
| Body | Brass |
| Check Valve | Yes |
| Size | 3.8 x 2.5 x 1 cm / 1.5” x 1.0” x 0.4” |
| Weight | 5.8 g / 0.2 oz |
Description:
Specification:
| Compartment | One main |
| Capacity | 16 L / 975 ci |
| Material | Welded metal wire |
| Attachment | QuickClick® Handlebar Mount (Fixer 3e) Fits ø22.2, ø25.4, ø28.6 & ø31.8 mm handlebars (shims included) |
| Max Load | 5 kg / 11 lb |
| Added Feature | Carry handle |
| Size | 35 x 26 x 25 cm / 13.8” x 10.2” x 9.8” |
| Weight | 1370 g / 3.02 lb |
Description:
For 12” blades feature aluminum die cast handles for accurate cutting. With 45 / 90 degree angle adjustments for ease of cutting and a 12” / 32 tooth per inch superior quality high speed steel blade, the HackSaw makes quick work of aluminum and carbon tubes leaving a clean and flat cut.
Specification:
| Tool Material | Aluminum / Steel |
| Saw Blade | HSS Bi-Metal 32T |
| Added Feature | Includes one 12” / 32T saw blade |
| Size | 40 x 17 x 2.5 cm / 15.7” x 6.7” x 1” |
| Weight | 550 g / 1.21 lb |
45 / 90 degree cutting angle adjustment
Description:
Easily attach your water bottle cage onto handlebars or seatpost with the tool-free installation.
Specification:
| Clamp | Compatible with handlebar diameters from Ø 22 - 38 mm |
| Material | Engineering grade polymer / Steel |
| Size | 8.5 x 6.5 x 2.4 cm |
| Weight | 43 g |
Description:
Perfect for storing your essential gear and tools. The rigid and durable Escape Pod+ features noise-reduction lining for content protection. Easily slides into most water bottle cages giving you the perfect way to carry extra gear on your next adventure!
Specification:
| Capacity | 520 cc |
| Attachment | Water bottle cage |
| Material | Engineering grade polymer |
| Size | Ø74 x 139 mm |
| Weight | 60 g |
INTRODUCTION
HR70 is specialized on precise and real time heart rate monitoring. It has 65 hours of long battery life, monitoring of heart rate changes at all times. It has functions of LED five color status prompts and heart rate warning. The multisport mode is suitable for various sports, helping you to enjoy sports more scientifically.
SPECIFICATIONS
| Types | Specification |
| Product Size | 50*30*15mm |
| Battery Type | Magnetic charging |
| Weight | 20.3g |
| Chest Strap Size | 65~95mm |
| Sensor | PPG |
| Heart Rate Range | 40~240BPM |
| Communication Technology | Bluetooth5.0, ANT+ |
| Waterproof Level | IPX7 |
The great performance of a JoeBlow® series pump in a more affordable package. Includes the easy-to-use TwinHead®.
| Head | TwinHead® w/ x-long hose Fits Presta / Schrader / Dunlop |
| Barrel | Satin aluminum |
| Gauge | 160 psi / 11 bar Top Mount Analog |
| Pressure Tuning | Air release button |
| Handle | Oversize padded |
| Base | Hardened steel |
| Added Features | Ball / Bladder heads, Hose dock, Handle lock |
| Size | 73.4 x 25 x 13.7 cm / 28.9” x 9.8” x 5.4” |
| Weight | 1.25 kg / 2.76 lb |
| Volume Per Stroke | 284 cc |
| Hose Length | 106.5 cm |
Compact and lightweight front light with 2 super bright 0.3W white LEDs illuminate your way home after dark. Rubber Strap allows tool-free mounting and removal from handlebar.
| Lamp | 2 super bright 0.3W white LED’s |
| Battery | 3.7V 330mAh Lithiumn Ion (integrated) |
| Control / Burn Time | 3 modes (Approx) 7 hr Blinking / 3 hr 0.5W Constant 35 hr Rapid Blink |
| Luminous Intensity | 60 Lumens |
| Reserve Time | (Approx) 0.5 hr |
| Charge | Micro-USB |
| Charge Time | (Approx) 3-4 hr |
| Lamp housing | Injection molded plastic |
| Mount | Rubber straps fits handlebar (ø22.2 - ø31.8 mm) |
| Added Features | Low battery indicator, Blinking mode |
| Size | 4.9 x 2.8 x 2.4 cm / 1.9” x 1.1” x 0.9” (Light) |
| Weight | 22 g / 0.78 oz (Light) |
DESCRIPTION
Are you tired of getting covered in grease, oil and road grime when you’re tuning up your bike? We are too. That’s why we created the world’s finest workshop apron.
The Muc-Off Workshop Apron has straps and buttons for adjustable size and length that keep you from getting tangled and perfectly sized pockets that make sure your hands are always free when you need them.
This Workshop Apron is a vital piece of kit for any lover of bikes. Now you can keep your tools, phone and gummy bears at close reach while protecting your clothes from the evils of bike grime! Not only is the Muc-Off Workshop Apron incredibly practical, but its rubberised logos and black design make sure you look good out there.
This apron isn’t just a must-have tool for the workshop; it’s pretty handy at BBQ's too!
FEATURES
- Protects clothes from grease and grime
- Buttons for adjustable length
- Straps for adjustable size
- Rubberised logos and black design
- Keep tools etc on hand with its convenient pockets
DESCRIPTION
Our Dry Chain Lube has been formulated to hold up to the extreme pressures that are applied to a modern drive chain.
Muc-Off Dry Chain Lube is formulated to hold up to the extreme pressures that are applied to modern drive chains. This highly versatile, dry weather chain lube has superior penetrative qualities that ensure every part of the chain link is completely lubricated. Our advanced ‘Dry Formula’ creates a clean, durable and protective chain wax layer that inhibits rust development and chain link corrosion. The formula creates exceptionally low surface friction to provide incredible drive chain efficiency without attracting contaminants. It’s clean, and it’s easy to use!
FEATURES
- Additives reduce friction and energy consumption
- Waxed based formula reduces metal to metal contact
- Excels in dry, dusty conditions
- Protects against rust development and corrosion
- Prevents chain wear
- Does not attract contaminants
- Ideal for MTB, Road and Cyclocross
- Can be applied to chain, cleats, shifters and derailleurs
*Only contents are biodegradable.